Recent content by Chris Chit
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
C
There’s no need to cut the dashboard, put a ratchet strap around the drivers seat base and the dashboard and tighten. It pulls the dash forward out of the way
-
C
I had to pull the last 5mm with the bolts
-
C
I think that might be my only option as well
-
C
The clutch arm was assembled correctly, checked it before I bolted it back on. I was removing the box again to check is I had fitter the clutch plate the right way round, as I did this by torch light late at night. I would think the clutch the wrong way round would explained the clutch drag, but...
-
C
Hi All, I have changed the grarbox and clutch on my discovery 300tdi. After start up the gears would not engage. I narrowed this down to clutch drag after eliminating at other possibilities I started to remove the gearbox again. Transfer box removed, the gearbox bell housing slide's back about...
-
C
I have checked the pipe that goes to the side of the gearbox, and it definitely has fuel in it. The othe pipe that comes off the fransfer box is a breather
-
C
Hi all, I have just changed the gearbox and clutch on my 98 discovery 300tdi. One of the pipes that comes off the side of the gearbox appears to go to injector no 4's leak off pipe. Does anybody know why this is?