Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    Disco 1 Definitive way to remove heater matrix on discovery 1 ..300tdi

    There’s no need to cut the dashboard, put a ratchet strap around the drivers seat base and the dashboard and tighten. It pulls the dash forward out of the way
  2. C

    Gearbox seams to be stuck to the clutch plate

    I had to pull the last 5mm with the bolts
  3. C

    Gearbox seams to be stuck to the clutch plate

    I think that might be my only option as well
  4. C

    Gearbox seams to be stuck to the clutch plate

    The clutch arm was assembled correctly, checked it before I bolted it back on. I was removing the box again to check is I had fitter the clutch plate the right way round, as I did this by torch light late at night. I would think the clutch the wrong way round would explained the clutch drag, but...
  5. C

    Gearbox seams to be stuck to the clutch plate

    Hi All, I have changed the grarbox and clutch on my discovery 300tdi. After start up the gears would not engage. I narrowed this down to clutch drag after eliminating at other possibilities I started to remove the gearbox again. Transfer box removed, the gearbox bell housing slide's back about...
  6. C

    Injector no 4 leak off pipe to gearbox

    I have checked the pipe that goes to the side of the gearbox, and it definitely has fuel in it. The othe pipe that comes off the fransfer box is a breather
  7. C

    Injector no 4 leak off pipe to gearbox

    Hi all, I have just changed the gearbox and clutch on my 98 discovery 300tdi. One of the pipes that comes off the side of the gearbox appears to go to injector no 4's leak off pipe. Does anybody know why this is?
Back
Top