Recent content by charliedurrant
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
C
Okay, here’s my take on replacing the steering angle sensor in a L322 2003 Range Rover.
There are other threads detailing the procedure but without photos:
http://www.fullfatrr.com/forum/topic12324.html?view=next...
-
C
Hope so, for reference here's another link saying the same thing with a video:
http://www.rangerovers.net/forum/showthread.php?t=66242
-
C
Here's the link
http://www.rangerovers.net/forum/6-range-rover-mark-iii-l322/171409-broken-drivers-door-cylinder-lock.html#/topics/171409?_k=60vvcu
C
-
C
Thank you again. I found some links that say an e46 BMW key barrel repair kit works, I'll report back if it does...
https://vod.ebay.co.uk/vod/FetchOrderDetails?ViewPaymentStatus&purchaseOrderId=737233315011
-
C
Can't leave this alone!
Found this on the bay:
http://www.ebay.co.uk/itm/322422499548?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I've got Allcomms...is it possible to fit this and have remote locking? Does the BCU need to match the key and can AllComms pair the new key to...
-
C
Saint,
Thanks for the response, appreciated. My problem was different to yours, my lock/ley barrel was broken. Door card removed etc which was a not required but hey ho. I then managed to manually lock the door by turning the lock latch on the lock itself. I of course shut the door and it was...
-
C
Hi Saint,
Thanks for a great how to, I have exactly the same problem. The key turns left and right in the lock and does nothing.
My remote fob does nothing either so I may have another problem but I've been using the key for a while (2 years) so I expect my current problem is the same as...
-
C
Umm, looks shiny too! Non Bosch or remanufactured Bosch, almost a coin flip!?!?
-
C
The temperature outside drops so of course a problem occurs with my L322.
Better half reported that the battery was flat on Monday, I get back after being away and fit a battery I bought a month back as the current one wasn't holding charge too well (or was it actually just fine).
All...
-
C
All,
Thanks for all the replies, I'll take a look, I've been away for a while and not had the time get dirty again...
Charlie
-
C
Thanks for the photo, I will write up a todo from the info in the thread. Sod about the 740 part arriving late.
-
C
Hi All,
I've started to notice a vibration when I first start the car from cold (bmw 4.4 v8). The car shakes initially when stationary and then after a few minutes everything is fine.
The engine isn't vibrating any more that normal.
If I drive before the shaking stops all is fine...
-
C
Marius,
I posted a link in the how it's outlining how to check your pump output which may assist with diagnosis...
Charlie
-
C
That's the chap I bought the thermostat kit from.
Charlie
-
C
I've had better luck with my britpart rad than 2 behr rads
Charlie