Recent content by baldy one

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. B

    Early uj

    so need to change the prop ujs on my 110. I ordered 4 from barry 4x4 but they are too wide. I measured my old one, which cap to cap is 75mm. Any one got a part number for these?
  2. B

    110 fuel gauge fail

    Bout half a tank of fuel
  3. B

    110 fuel gauge fail

    110 fuel gauge not working. This is in the middle of a rebuild. 12.3 v going into gauge, 6.4v out of gauge. 6.4v at tank. Reading zero all the time....
  4. B

    110 200tdi exhaust. Won't fit

    Having fitted a 200 tdi to my 110, I'm having bother mating a standard 110 200tdi exhaust to the front cast down pipe. I think after investigation that the cast pipe could well be from a discovery. I've removed it and seems to have the number HTC 2172 or 2572 or 2112 on the cast pipe (difficult...
  5. B

    Lucas 128sa ignition switch

    i have this ignition barrel for a 110 I'm trying to rebuild. The connections are as follows. From the 12o clock position 1. Large connector 2. Small connector 5. Large connector 4. Small connector 3. Small connector 2. Small connector The cables I have are Large brown Large white Small white...
  6. B

    What wire where?

    It's a 1986 but very much messed about. Pretty sure it's a later bulkhead and wiring to match!
  7. B

    What wire where?

    New ignition switch, its marked as BATTERY ACC ST IGN as I removed this months ago I can't remember Which cable goes where. Any help always appreciated
  8. B

    200tdi/ 110 exhaust

    Why? Because I bought it with a knackered engine and the 200 was available at the right price.
  9. B

    200tdi/ 110 exhaust

    Sorry, this is a 1986 on a D plate. My mistake
  10. B

    200tdi/ 110 exhaust

    Should say 1986, my mistake
  11. B

    200tdi/ 110 exhaust

    The 200 tdi is from a defender not a discovery.
  12. B

    200tdi/ 110 exhaust

    excuse my ignorance on this but I'm putting a200tdi into a 1996 2.5 n.a. 110. I believe that he engine mountings will be fine so will a off the shelf exhaust fit? Common sense says it will but.........
  13. B

    110 rebuild....Engine ID

    My mates a registered breaker, doesn't do land rovers normally but saw this on the copart website and bid on it for me. Cost without delivery was £900. The sum of the parts more than covers this. To be honest it wouldn't take much to put the 90 back on the road but due to it being a breaker...
  14. B

    110 rebuild....Engine ID

    http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/Mobile%20Uploads/2016-12/9DF73917-C254-4C25-BFA5-861ABDD1E451_zpswwj2uggg.jpg.html
  15. B

    110 rebuild....Engine ID

    %5BURL=http://s1345.photobucket.com/user/Chrisbaldmiesterwalker/media/Mobile%20Uploads/2016-12/9DF73917-C254-4C25-BFA5-861ABDD1E451_zpswwj2uggg.jpg.html%5D%5BIMG%5Dhttp://i1345.photobucket.com/albums/p678/Chrisbaldmiesterwalker/Mobile%20Uploads/2016-12/9DF73917-C254-4C25-BFA5-861ABDD1E451_zpswwj2...
Back
Top