It's a while since I've been on but just to let you know I eventually had fitted a bigger sunroof one you can fully open and shoot out of it took the rear aperture to be enlarged for it to fit its manual 2 handle open or close and it locks happy days
After reading lots of threads about various alarm/immobiliser issues i have a recommendation ... when ever and no matter for what reason you plug in a tester, beside the main reason for what you've got there, enter in the BCU menu too and set the...
Thank you all for the replies, I just had the time to check the car today. I did check the hose as mentioned previously, the hose was loose, when I touched it, it just fell. So I tried to cut it and put back in but that also did not worked and...
If you have a look at Landyzone International Rescue! (You will need to load the info onto Google maps).
You may find some landy owners who may be able to help in tour search?
Kev
The MHK100820 is AAP sensor for Eu3 engines, the MAP/IAT is MHK100640/BOSCH 281002205 but if you dont want to buy genuine LR which is the best get a bosch one not other aftermarket
Hi, unfortunately without a proper diagnostic tool all you can do is to guess and spend more money on parts hoping that it will be fixed eventually
what's certain is that if at 8 threads on the wastegate rod is not going to overboost that engine...
I'm sure you would get asked by others!
Are you able to get a code reader! I.e. nanocom? From your part of the world?
As is seems that you have done most, if not all! on the mechanical side? Which would mean you need to have a look at the...
Welcome to the asylum!
You might want to pop over to the "introduce yourself " part of the frum and do that.
Also to put up pics.
We like pics!:):):)
There are plenty of threads on here about the 3 amigos, causes and cures.
I will keep an eye on this post!
I had similar problem with mine! But the end result was fixed by replacing the pedal assembly shaft? (Due to rust on the old one)??
Kev
Assuming this noise is the same you had in your last post?
Sounds like you will need to check the area and start to Tighten or Replace anything that is loose or missing?
Another pair of ears will also help!
Kev
Very off topic 😅🤣😂 (Bumper v Handle!!)
You can only try! If not working send back or sell to D2 owner?
I'm sure a couple of days/weeks will not hurt mate!
Kev
Should be the same!
Same problem a few years ago, picked up 2003 bumper for my 1999 D2👍
Now changed it for steel one last year!
Plastic bumpers don't like bollards 😅🤣
Kev
I have also removed mine when I cleaned and protected the chassis. If it is empty not a big deal to remove it, I also used gearbox trolley to slowly let it down to the floor (but when it is fully empty it is not heavy . I remember also that the...
thanks for your reply. Already got an agreed value with Adrian Flux which curiously was cheaper than the standard market value provided by esure, which did surprise me!
And yes it is a hobby and I bought it with a view to never selling it, so...