Recent content by arnopretorius
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
Hi Nodge
Thanks for your reply...
is there anything I can do to test this?
-
Hi Guys
So I still have an issue with my Landy..
I have checked all the fuses and relays and I have also replaced the crank sensor and still no luck..
Once the car starts it cuts out immediately....
Any new ideas for me to look at?
-
Hi Guys
I have bypassed the cut-off switch and no luck... I cant remember bumping the crank sensor or anything like that....
-
Hello Guys
Hope all is well..
So I have a bit of a weird issue with my Freelander 1 1.8. On Monday I started getting some issue with the starter and I took it out and took it to a guy to get sorted... Starter is all sorted now. So this morning I decided to quickly put it back in the car and...
-
Hi Guys...\
I cannot remember ho to start a new post..
Could someone please remind me?
-
Hi Rob..
Yeah.. I'm now trying everything to sort my car..
What makes it strange is that it is intermittent.. It comes and goes and that makes it hard to diagnose..
-
Quick question...
Could this misfiring issue be cause by a faulty connection on the harness where the harness from the ecu and the engine connects? Like a dry connection
-
I've regapped them to 0.9...
Will test later with the sealing around the inlet seems... If it works then I can get a replacement inlet manifauld
-
Oh yeah..
Just an update regarding the inlet manifauld.
Instead of just replacing it I took gasket maker and sealed all around the seems..
Will test when it is fully cured and update
-
Hi Htr..
Except for the millage difference..
Does the platinum burn hotter than the nickle core?
-
Hi guys..
Quick thing..
I got these plugs from the parts store last week.. NGK BKR6E-11
I see the plug you guys recommend is a NGK PFR6N-11
They both have a temp rating of 6 and a gap size of 1.1
Whats the difference then?
-
Thank you Gents.. Will look into the plugs
-
Any suggestions on plugs to use... I've put new plugs in but they are NGK and not platinum... Will check plug gap tomorrow.
-
My scanner is very basic... I will remove the inlet manifauld and inspect for any leaks...
I know it's not coils and or plugs because they were replaced recently...
I will try to test fuel pressure as well...
-
I had a suspicion it is but wasn't that?
How can I test for leaks?