Recent content by Angel_110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    Catching wheel Arches after new Springs and Shocks

    Cheers Scooby. I’ve wondered how you adjust them and now I know. I love that guy. He does some great videos. Thanks again.
  2. A

    Catching wheel Arches after new Springs and Shocks

    Cheers Ian. Might just do that.
  3. A

    Catching wheel Arches after new Springs and Shocks

    You're probably right. I might take the spacers off to see if it makes a difference. Thanks again. Chris
  4. A

    Catching wheel Arches after new Springs and Shocks

    Hi Turboman I had the spacers fitted as the front wheels were catching on full turn. They are 265/75/16 which I'm told are standard size but I'm a bit clueless with that kind of thing. It didn't happen before the new springs/shocks were fitted which makes me wonder if it has anything to do...
  5. A

    Catching wheel Arches after new Springs and Shocks

    Merry Xmas everyone! About six months ago, I had new Baermach medium duty springs fitted. The kit came with soft shock absorbers (Wild bear I think). I’ve noticed since then if I drive about 20mph over speed bumps, I catch the arches. Yesterday I went on a very very gentle lane (technically a...
  6. A

    Trailer Light wiring

    It doesn't come ion under any circumstances for me I'm afraid. I do not think the light is wired up. I'm wondering where the wiring goes to from the binnacle. Thanks Chris
  7. A

    Trailer Light wiring

    Hi Everyone I've got an ex military TD5 (White Fleet). It still has the original Nato 24v 12 pin socket (no idea if its still connected to anything). After I bought the vehicle, I had a tow bar fitted for my caravan with a 12v set up. However, my trailer light does not appear to be connected...
  8. A

    Parking Brake Light

    Cheers Scooby. No sign of the yellow wire under threw seat anywhere. I had the binnacle out to look for a yellow wire but couldn't see one (light was fading a bit so will check again tomorrow). I removed the lid from the brake fluid header and the brake light came on so I know it works! Will...
  9. A

    Parking Brake Light

    Thats great Scooby. Cheers. So in terms a simpleton can understand, there should be a wire going from the switch to the "header". Is the header the panel in the binnacle? I looked at the diagram on Retroanaconda's site and can see where the wiring is supposed to go on the small plug (number...
  10. A

    Parking Brake Light

    Thanks Mick - I'll investigate!
  11. A

    Parking Brake Light

    Hi Everyone I've only just noticed I don't have a parking brake light (TD5 110) (taken me a year to notice :rolleyes:). I've had the gaiter off the hand brake and there is a switch there but no wires attached and none in the vicinity. Does anyone know how to wire it up? Is it simply a case of...
  12. A

    D2 TD5 T Box in Defender?

    Hi All thanks for all the advice. I went for the swap in the end and it’s now much more of a pleasure to drive on the road. Significant increase in range through gears, significant reduction in noise, marginal loss of power but that might be because my new turbo hasn’t been increased as it’s...
  13. A

    D2 TD5 T Box in Defender?

    Thanks Everyone. I think I'm going to go for the swap. I'm too precious about my truck to do any serious off roading and only tow up and down the motorway a couple of times each year at most. I run standard tyre size I think (265 75 16), it has a stage 2 remap. The spare T box does have a...
  14. A

    Disco 2 TD5 T Box in Defender?? Should I?

    got you. Clearly crap at computers. Cheers :-)
  15. A

    D2 TD5 T Box in Defender?

    Hi Everyone Sorry - I think this is a well worn conversation but vert grateful for everyones thoughts. A mate ha been persuading me to put his spare Disco 2 TD5 T Box in my 2006 TD5 Defender (heavy beast with lots of kit and occasional caravan towing). Long story short, I have ti return my...
Back
Top