Recent content by alanlucas

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    What did you do with your Range Rover today

    the guy who bought it lives in Yorkshire and he used to be a Land rover mechanic but runs a farm now so he's going to do it up and put it back on air and take it to the Land rover show at Gaydon in May so it's gone to a good home. Most other enquiries were from breakers. Wasn't going to let that...
  2. A

    What did you do with your Range Rover today

    We were issued with a section 21 in August so bought an old folks bungalow with 1 parking space and moved in 1st November. £3k for a new combi boiler ! Sold the mgf 1.8vvc. Sold the saab 9-3 1.9 vector sport, scrapped the e39 528se as head gasket went during MOT emissions test and not a single...
  3. A

    What did you do with your Range Rover today

    Sold mine yesterday
  4. A

    P38 accumulator cost

    i fitted a wabco to my mk3 h reg granada - saab and jag are same but try finding one lol
  5. A

    w reg p38 4.6 thor vogue for sale

    it's reduced now to £2250
  6. A

    w reg p38 4.6 thor vogue for sale

    2000 P38 4.6 vogue range rover oxford blue with lightstone leather trim mot'd expired November 2023. On coils but new Dunlop airbags in boot. Currently sorned. Check mot history & mileage on DVLA website. W297 LDA £1600. SOLD 25/02/2024
  7. A

    P38A STC3593 RH & STC3594 LH rear level sensors

    I've found how they should fit - no bracket required.
  8. A

    P38A STC3593 RH & STC3594 LH rear level sensors

    I think the bracket shown in Rave is the bracket that is welded to the chassis. It's the orientation of the sensor body itself that is in question, as I believe there are four 6mm clearance holes in that bracket and I've seen rear sensor kits online with an additional bracket that has 2x6mm...
  9. A

    P38A STC3593 RH & STC3594 LH rear level sensors

    Thanks, I've found some later part numbers for the rears ANR4687 and the fronts ANR4686 which work for both sides. Do I need the brackets for the rears or do they bolt straight in ? Mine's on springs and the previous owner removed all the sensors, so i've got no points of reference.
  10. A

    P38A STC3593 RH & STC3594 LH rear level sensors

    Are these interchangeable or not ? If they are interchangeable, why have different part numbers ? If they are not interchangeable, is it because the outer pins in the sockets are handed and only the middle pins have the same output ?
  11. A

    P38 2001 suspension issues

    p38 rear level sensor mounting brackets - are they required on a w reg p38 to be able to fit the rear sensors or are they only required on earlier years ? I know the earlier sensors have flying leads attached and the later sensors have no leads and that the mounting brackets for the fronts also...
  12. A

    P38A Drivers lock

    or a blast with wd40 with the red plastic straw attached
  13. A

    P38A E10 petrol arrgghh

    lead
  14. A

    P38A E10 petrol arrgghh

    I remember when 4 star was 42p a gallon - and that was after the 1973 fuel crisis !
Back
Top