Recent content by Adamchenny
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
A
Hi Matt, that may be the case! How do I reset it? I have also done the timing and it is marginally better but not perfect
-
A
Hi I am havin problems with my v8. It Was running fine, because I am going away off roading for a week I thought I would give it a birthday! I changed the ht leads dizzy cap and rotor arm with powerspark kit, that was causing it to miss like mad. So I bought a genuine cap rotor arm and magnecore...
-
A
Have you got a link for the one that you fitted. Thanks for reply
-
A
Would that stop all of them? Where are the earths for them?
-
A
Sorry I didn't mean it like that. Just thought I might have been thick lol
-
A
I have lifted drivers seat out and there the return I think has a joiner in already I pulled the joiner out and no diesel came out is that normal i had it running on Tickover. I take it the one with the bigger metal bit on the top is the flow pipe?
-
A
Ok that would mean cutting the pipe here there and everywhere then?
-
A
As the title says was fine one day and then nothing on all of them! I have checked fuses etc all fine. I have checked wiring loom where it foes in an out of chassis and seems ok.
-
A
Right a quick update, I put some clear hose form lift pump to fuel filter and then to injector pump. The air bubbles were coming from lift pump so I put a new lift pump in it and new fuel lines from lift pump to fuel filter to injector pump. And it's still leaking back to tank. I have put new...
-
A
It's definatly not in diff lock so will have a look at the switch on weekend thanks for photos an advise Tim and everyone else.
-
A
Well just to check what's the best way to rule out diff lock engaged permantley
-
A
R380 gearbox not sure or transfer box but its out of a disco because its higher geared. Yeah it's not in diff lock but light says different
-
A
It's a 98. No diff lock definatly isn't stuck in as I tries that on some ground humps.
-
A
Hi my diff lock is on all the time, although when you have it switched off ypu can hear diff lock going in an out. If I play with lever I can get it to go off for a bit. Any body know how to get to the switch or what to try. Thanks adam
-
A
I replaced the spill off pipes already that's what I hoped it was. I have just had another look tonight forgot my 8mm pipe unfortunately but I have cracked off bleed screw on filter housing and primed for ages usin left pump and nothing turned over for 10 seconds it started and was spitting out...