Search results

Hi Matt, that may be the case! How do I reset it? I have also done the timing and it is marginally better but not perfect

Hi I am havin problems with my v8. It Was running fine, because I am going away off roading for a week I thought I would give it a birthday! I changed the ht leads dizzy cap and rotor arm with powerspark kit, that was causing it to miss like mad. So I bought a genuine cap rotor arm and magnecore...

Have you got a link for the one that you fitted. Thanks for reply

Would that stop all of them? Where are the earths for them?

Sorry I didn't mean it like that. Just thought I might have been thick lol

I have lifted drivers seat out and there the return I think has a joiner in already I pulled the joiner out and no diesel came out is that normal i had it running on Tickover. I take it the one with the bigger metal bit on the top is the flow pipe?

Ok that would mean cutting the pipe here there and everywhere then?

As the title says was fine one day and then nothing on all of them! I have checked fuses etc all fine. I have checked wiring loom where it foes in an out of chassis and seems ok.

Right a quick update, I put some clear hose form lift pump to fuel filter and then to injector pump. The air bubbles were coming from lift pump so I put a new lift pump in it and new fuel lines from lift pump to fuel filter to injector pump. And it's still leaking back to tank. I have put new...

It's definatly not in diff lock so will have a look at the switch on weekend thanks for photos an advise Tim and everyone else.

Well just to check what's the best way to rule out diff lock engaged permantley

R380 gearbox not sure or transfer box but its out of a disco because its higher geared. Yeah it's not in diff lock but light says different

It's a 98. No diff lock definatly isn't stuck in as I tries that on some ground humps.

Hi my diff lock is on all the time, although when you have it switched off ypu can hear diff lock going in an out. If I play with lever I can get it to go off for a bit. Any body know how to get to the switch or what to try. Thanks adam

I replaced the spill off pipes already that's what I hoped it was. I have just had another look tonight forgot my 8mm pipe unfortunately but I have cracked off bleed screw on filter housing and primed for ages usin left pump and nothing turned over for 10 seconds it started and was spitting out...

Hi daz, Yeah I bought a whole new spill line and it came with new banjo bolts and washers so that shouldn't be a problem. Will try the clear pipe what size pipe is it so I can order some land rover isn't at home in a mates garage.

hi guys i recently bought a defender and i have done quite alot of work to it, one thing i am getting stuck with is when i start it from cold when sitting there for a whilke it turns over a few times before firing and runs rough for 30 seconds, if i switch it off after it firsts fires even...