Recent content by 7Oaks

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. 7Oaks

    Series 3 New solenoid - now my charge light is on permanently

    thank for asking (and thanks to everybody else for helpful input). I was away this w/e so haven't been able to have a go at sorting this out. Based on Rob1miles' comment I think the dynamo is charging and that it is therefore a case of finding the wire that should go from the alternator to the...
  2. 7Oaks

    Series 3 New solenoid - now my charge light is on permanently

    Hi - I replaced my solenoid becasue the old one was clicking. I connected all the wires as per the old one and the Landy now starts fine. But now the charge light is burning bright and not going out. It seems likely that I did something wrong. As the photos (attached) show the old one didn't...
  3. 7Oaks

    Series 3 wiring problem

    Hi - I have a 1982 S3. My recent efforts to get my indicators working might be relevant. My S3 doesn't have an indicator relay but a transistorised switch with four wires attached to it. While sorting out another wiring problem I had a big short - melted wires and much smoke. So afterwards...
  4. 7Oaks

    Series 3 Voltage regulator

    thanks Blackburn - that info did the trick. Checked the wiring to the guages and found light greens to one guage and dark to the other. So I swapped two of them round and voila! Working guages. Luxury! Still puzzled that the voltage regulator has different colour wires and isn't bolted to...
  5. 7Oaks

    Series 3 Voltage regulator

    My wiring has been in a bit of a tangle for a while, but I have at last got round to sorting out the dashboard and getting the heater duct sorted out. Now that the clocks are back in the binnacle, everything electrical seems to working OK (switches, lights, ignition etc.) but the temp guage...
  6. 7Oaks

    Series 2 Manufacturer info req'd - who makes Elephant Grey Vinyl?

    I got my upholstery material from Woolies £16.50 per m / 137cm wide. http://www.woolies-trim.co.uk/p-1245-expanded-vinyl-grey.aspx
  7. 7Oaks

    Paint / Quality / Prep / Colour codes advice req'd

    I've used HMG - it seems good. Mostly I used Tractol when repainting my SIII which seemed to me to be similar in terms of quality and easy to use. I have more to say choices and how they worked out over here.
  8. 7Oaks

    Series 3 Help with agreed valuation

    So long as your chassis and bulkhead are sound, £4k would be reasonable as it looks like it's in good shape. In my opinion (others will certainly differ!) the 200tdi conversion will limit its value in years to come, but as Series IIIs are only just beginning to climb in value, that shouldn't be...
  9. 7Oaks

    Series 3 Bonnet Mounted Spare Lock Post

    thanks! I'll send a PM.
  10. 7Oaks

    Series 3 Side door mirror and front sidelights

    I think these items are reasonably close to the original spec for an '83 S3 (the mirrors moved from the wings to the door in 1980): www.famousfour.co.uk/new_parts/ff_part?part=749...
  11. 7Oaks

    Series 3 Side door mirror and front sidelights

    Mark, I had mismatched rusty mirrors on my doors but for the time being they have been removed and I've put mirrors n the wings. Looks much better but of course not such a good rear view but at 45 mph I dont do much overtaking ... New mirrors look like this:
  12. 7Oaks

    Series 3 Bonnet Mounted Spare Lock Post

    Hi John - do you have the Z clamps? If you dont want them, I'd be interested in buying them off you. Send me a PM?
  13. 7Oaks

    Series 1 Bargain!

    This one is irresistable! But I wonder whether my better half would agree ... http://www.ebay.co.uk/itm/Series-One-Diesel-88-CHASSIS-NUMBER-ONE-1957-first-one-off-production-/231831870957
  14. 7Oaks

    Series 3 I have a plan... 88" camper

    how about a platform just above the height of the bulkhead, covering the entire area of the load area, with a hinged flap which you could flip forward to rest on the steering wheel? You could then stow an air matress and other camping clobber under the platform and out of sight when not sleeping...
  15. 7Oaks

    Series 3 Progress! time lapse sequence

    Painting – the garage isn’t the best place to paint – cold lots of dust from woodworking projects. But I did my best to clean the place up. I used a leaf blower to drive as much dust out of the corners as possible and then mopped it all out before finally setting up for painting. Painting was a...
Back
Top