Recent content by 2_stroke

we've got a 2004 facelift freelander and i wonered how o go about connecting my i-pod. does anyone know how? :p

Has any one else got any more reassureing words for me :bounce:

thats reassuring to know :) thankyou ill give it a good blead

hi there gents, having some issues with a recently purchased td4 04 reg SE 3dr. the cluch feels as though it needs a really good blead, but as ive not owned it long can i be sure there is not a more serious/expensive problem. when pulling away i need to pump the pedal 5 or 6 times to...

as far as ive always known/assumed/been told if you avoid paying fuel duty then its as bad as running red and carries the same punnishment, so surely if this is the case then why risk your vehicle breaking through poor/inadiquate/incorectly mixed fuels and just fill it up with red, you'll still...

hey gents, i've not been about for quite some time so only just seen this post or i would have put myself forward to help, i think im near swadlincote, if its the one between ibstock and measham lol. i was wondering about this chap with lots of bits laying about as theres all sorts of fiddly...

i know ive been through all this on my build thread thats been lost in the sands of time. its going to come back to me on a q plate as ive not used enough of the disco to call it a disco nor enough series to call it a series and its got to go through an sva test

it was over lapping but ive supported the front of the rear tub now and its made all a bit better, then i took the roof back off and got on with ajusting the angle of the window with the ruler and its good even gap there now, i could see plain as day the angle of the screen was too far back when...

this is it as it stands :) i did a bit more to it yesterday evening so its a bit better than this now

Morning all :) just wondering if anyone has any tips on lineing up all the body work on my series 3 88 hard top, its all been stripped and put on a discovery chassis. to be honest im nearly there and the pannel gaps and shut lines look prety good id just like to be sure its right :o...

i posted earlier today about a 200tdi reving up on start up. the engine had been stood on a pallet for two years. the injector pump had become damp from moisture in the air and is very sensative to corrosion, something must be stuck... we put it in, plumbed it up and started it only for it...

ahh this does seem about right, it was stored in the damp with no fuel lines, mabe ill have to replace that, thanks for your advice :)

hey there, ive just fitted a 200 tdi in to a 2.5 na perkins 90, all done and in, and it runs... in a fashion :( as soon as you start it it revs right up, as if the throttle is jammed open, the cable is free and the lever on the injector pump is free too, ive checked the diaphram and the...

hey the all, on saturday and sunday last week we took a ruined perkins 2.5n/a out of an f reg 90, to put the 200 tdi in. im not sure it should have had this engne in it anway bit i may be wrong as i oftern am :o it all went rather well realy, the loom even swapped over quite well its just...

i work in cotteswolds, live in leicester, travel to the wolds on a monday morning and come back on a friday evening then back on monday. drive an escort van too and from with a tow bar but i couldnt pull anything as heavy as a vehicle, it would kill the van 07972126822 Edd :)