Fixed Radio display!
- Thread starter Darrnw
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tinytdi
New Member
- Posts
- 424
- Location
- North West
Its the same fault that Nokia mobile phones suffer from...the elastomers at either side of the screen lose their contacts...I just licked mine and stuck it back together..lol...worked fine..
New elastomers for mobiles are 99p a go so I wonder where you can get hold of some that fit the freelander clock...could make a fortune on ebay!!
I always cover my clock when parked in summer now...
New elastomers for mobiles are 99p a go so I wonder where you can get hold of some that fit the freelander clock...could make a fortune on ebay!!
I always cover my clock when parked in summer now...
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
Yep like yer style good info thats whats needed ,simple is always the best. . .
Hi Mark,
Thanks a lot and I see what you mean now, it's the kind of paper you stick on doors or windows when you have to paint so that you have a lined up side and you can paint without having to worry at all (except for the width of the tape? ). Thanks again and good luck with whatever you decide for your Hippo.
Thanks a lot and I see what you mean now, it's the kind of paper you stick on doors or windows when you have to paint so that you have a lined up side and you can paint without having to worry at all (except for the width of the tape?
). Thanks again and good luck with whatever you decide for your Hippo.Last time I tried to fix the display I put some extra pressure between the ribbon contacts and the rubber band around the white plastic innerhousing by adding a piece of an old bicycle innertube, it worked great until the car came out and in the sun than I started to loose again parts of the digits, after reading the above post re cleaning the contacts etc. I opened the unit again today but I did not peal away the ribbon all the way off the board, I left the last bit attached to it and just cleaned the visible 3/4th of the contacts. I tried to clean it with alcohol but it didn't work out too well so I took a small flat screwdriver and gently scraped off the grey/black layer on the contacts until the copper was clean again, wiped off as much as possible the contactstrips of the ribbon as well and as the ribbon was not detached completely no need to position it, just fold it back as it was and put a piece of cellotape both sides, I first used some layers of masking tape but that was too visible white in the display so I took it apart again and as I had no black plastic insulation tape I used red (6 layers of it) tape instead, I also fixed with cellotape the green plastic piece (through which the green colour for the display comes) on the white housing as first time I noticed the light on top of the display was yellow meaning that the green plastic plate had moved during the assembling. The careful cutting was unfortunately on the top line not too careful as the knife went off the edge which means I now have a line in the display but guess I can live with that, at least everything is visible again and looks rather steady, curious to see how it behaves when it becomes warmer again. If it stays ok I think that it is the contacts going bad that causes the displays to fade away as the first time with the rubber pieces inserted I put more pressure on the total as now with the 6 layers of plastic tape, only difference that now the contacts are cleaned. Unfortunately forgot to take some pictures of the different steps while I was onto it this afternoon. Thanks again Darrnw, you saved me (and hopefully others) money. Take care.
Hi,
Re the radio/clock display, today the car has been the whole day in the sun again and the display still looks brilliant, the digits even look blacker than when new, thus cleaning the contacts pays definitely off. Furthermore that remaining edge of red tape looks really good in real life, better than you will expect by seeing the attached picture. (will post the picture in a sec but have taken it after I started this entry, if I now go to have it ready I loose everything above, so patience pse). On the picture you can also see where I cut in the display, by putting it together the display got a little cross and by cutting the last layer of masking tape I hit the display, when I put it under power I saw the display was cross (the right hand side was pointing down compared to the left hand side) and the white edge of the masking paper didn't look nice (to me anyway) so I took it apart again and by re-assembling it with the red tape I first fixed the display in the correct position with some cellotape, after pealing off the last layer of red insulation tape I saw the cutting, shame....)
Re the radio/clock display, today the car has been the whole day in the sun again and the display still looks brilliant, the digits even look blacker than when new, thus cleaning the contacts pays definitely off. Furthermore that remaining edge of red tape looks really good in real life, better than you will expect by seeing the attached picture. (will post the picture in a sec but have taken it after I started this entry, if I now go to have it ready I loose everything above, so patience pse). On the picture you can also see where I cut in the display, by putting it together the display got a little cross and by cutting the last layer of masking tape I hit the display, when I put it under power I saw the display was cross (the right hand side was pointing down compared to the left hand side) and the white edge of the masking paper didn't look nice (to me anyway) so I took it apart again and by re-assembling it with the red tape I first fixed the display in the correct position with some cellotape, after pealing off the last layer of red insulation tape I saw the cutting, shame....)
ming
SPACE TWOT
- Posts
- 11,977
- Location
- PLANIT ZOG
Nice work Willo. . .
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
I Like it when you post us photos Willo ! They make life soo much easier and the effort is much appreciated (by me anyhow) The display looks much nicer with the Black facia, mine has a really crappy green/blue one to match the door handles?ming said:Nice work Willo. . .
But why dose yer clock show one hundred and five minutes past three on Friday morning???
hee!Keep the photos comming Willo !
And nice one Tiny! Spot on practicle advice
mondo said:I Like it when you post us photos Willo ! They make life soo much easier and the effort is much appreciated (by me anyhow) The display looks much nicer with the Black facia, mine has a really crappy green/blue one to match the door handles?
But why dose yer clock show one hundred and five minutes past three on Friday morning???
Keep the photos comming Willo !
And nice one Tiny! Spot on practicle advice
Hi mondo,
well that's not minutes but seconds you see. No, I took the picture just after I put the contact on so it shows the station I installed on postition 1 of the radio is located on 105.3 Mhz. If I'd waited a little the time would have come up with only the P1 indication on the left and the time on the right.
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
willo said:
Hi Willo!
MMmm
,Mine just boring old fashioned Time. (I think)??? AND blue/green thingy
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
Id love to willo ! Just dont have the time or the energy to push it about all day to get 60mpg out of itwillo said:Hi mondo,
If you want a nice black etc.. clockdisplay I think Mark has one available for you at a decent price, in fact you will get a full "de luxe" packing around it?
Ok, maybe 60mpg was a little white lie
She can however squeaze 24mpg on a run. You have to remember though you have lots of horses under the bonnet to play with and they're very thirsty in there.
I thought she sounded great until my mate brought his Dads Aston Martin DB7 Vantage Volante round last night. Now that sounds the muts nuts. V12 6 litre which gives on average 16mpg. Yes, 3mpg less than my average What's that all about?
She can however squeaze 24mpg on a run. You have to remember though you have lots of horses under the bonnet to play with and they're very thirsty in there.
I thought she sounded great until my mate brought his Dads Aston Martin DB7 Vantage Volante round last night. Now that sounds the muts nuts. V12 6 litre which gives on average 16mpg. Yes, 3mpg less than my average
What's that all about?marksurry said:Ok, maybe 60mpg was a little white lie
She can however squeaze 24mpg on a run. You have to remember though you have lots of horses under the bonnet to play with and they're very thirsty in there.
I thought she sounded great until my mate brought his Dads Aston Martin DB7 Vantage Volante round last night. Now that sounds the muts nuts. V12 6 litre which gives on average 16mpg. Yes, 3mpg less than my average
In my opinion there is only one way to get 60 mpg and that is the one below
:
Hi all,
After the heat-wave we had here (5 days in a row of over 25°C with three of these days in a row going over 30°C) the temperature here dropped now to 15°C, can yhou imagin. But reason for my entry is that during this warm period the fixed display remained ok and looks better than new, also what I noticed is that during a 260 kms trip I did yesterday I had a rattle less in my dashboard, so it looks as the layers of tape added in fixing the display took away some play in the unit that caused a rattle I could not locate and which I had since the car was new. Won in two fields on this.
After the heat-wave we had here (5 days in a row of over 25°C with three of these days in a row going over 30°C) the temperature here dropped now to 15°C, can yhou imagin. But reason for my entry is that during this warm period the fixed display remained ok and looks better than new, also what I noticed is that during a 260 kms trip I did yesterday I had a rattle less in my dashboard, so it looks as the layers of tape added in fixing the display took away some play in the unit that caused a rattle I could not locate and which I had since the car was new. Won in two fields on this.
How do you remove the clock from the facia? Do you just prise it out to access the ribbon cable?
First, with a small flat screwdriver, remove the exterior plastic casing that covers the sides of the disàplay. Then you can see two torxscrews you can remove after which you can pull the whole display out of the facia, on the back you see then the connector, by pussing on a button you can release it and remove the connector from the display casing. afterwards you have to 'unclick' the housing and take the parts apart but all that is explained in your previous quoted post. Good luck.
