defender body to chassis help

hi
fitting a new chassis soon and i need to locate all of the bolts so i can remove it all at once done
1 wings have been removed
2 rear c/m x10
3 rear out riggers x4
4 bulk head bolts still in place just removed nut ready x2

are there anymore let me know or if you have a diagram it will be much welcome
Roy

Parts diagram in the 'parts and paint' sticky might help

http://www.landyzone.co.uk/lz/f7/part-numbers-paint-colours-138302.html

Is it a 90 or a 110?

Hi
Sorry it's a 300tdi 90
Roy

Are you planning to lift the bulkhead, roof, tub etc off in one go or in component form?

this is how i did mine ( another job not yet finished !)

discosfa said:

Hi
Sorry it's a 300tdi 90
Roy

Click to expand...

Sounds like you got most of them. Might be some in the tub floor?

There was in mine, one each side just forward of the rear springs directly over the chassis, but that was a 110, worth a check though.

hi
all in on ,wings already removed

Boris113 said:

Are you planning to lift the bulkhead, roof, tub etc off in one go or in component form?

Click to expand...

There's 2 above the a frame crossmember one on each side on abit of angle, then 2 triangular plates in front of the front bulkhead that secure the bulkhead, quite easily lifted off in one lump

Sorry, forgot to attach in previous post

Don't forget silly things like brake/clutch pipes on the front of the bulkhead, accelerator cable, rear chassis wiring loom, battery cables etc.

Tailgate hinges if it's a pick up also.

Be careful not to open the doors when the body is suspended because they will stop the bodywork moving around. Leave the windows open in case you need to reach inside.