defender body to chassis help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discosfa

discosfa

Member
Posts
45
Location
nr Eccleshall,Staffordshire
hi
icon_smile.gif

fitting a new chassis soon
icon_biggrin.gif
and i need to locate all of the bolts so i can remove it all at once done
1 wings have been removed
2 rear c/m x10
3 rear out riggers x4
4 bulk head bolts still in place just removed nut ready x2

are there anymore let me know or if you have a diagram it will be much welcome
Roy
 
discosfa said:
Hi
Sorry it's a 300tdi 90
Roy
Click to expand...

Sounds like you got most of them. Might be some in the tub floor?

There was in mine, one each side just forward of the rear springs directly over the chassis, but that was a 110, worth a check though.
 
There's 2 above the a frame crossmember one on each side on abit of angle, then 2 triangular plates in front of the front bulkhead that secure the bulkhead, quite easily lifted off in one lump
 
Don't forget silly things like brake/clutch pipes on the front of the bulkhead, accelerator cable, rear chassis wiring loom, battery cables etc.

Tailgate hinges if it's a pick up also.

Be careful not to open the doors when the body is suspended because they will stop the bodywork moving around. Leave the windows open in case you need to reach inside.
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
O
Body Alignment Help Needed
Replies
17
Views
3K
catman275
catman275
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
300
xDParis64
xDParis64
Tango91
  • Poll
Disco 2 Things I wish I knew when I took the body off (99 D2 TD5)
Replies
8
Views
3K
FlatbedPilot
FlatbedPilot
Bezdonian
1993 200Tdi Defender 110 Sw for Sale (SOLD)
2 3
Replies
43
Views
8K
lynall
L
Back
Top