Breaking ES disco 3.9 V8

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Discodad

Well-Known Member
Posts
1,844
Location
East Anglia
1995 3.9 V8i ES spec.
The wheels, snorkel, guards, lift kit, sliders, bumpers and winch are gone.
The rest is up for grabs.
Needs to remain rolling so complete axles not for sale.
Engine is being broken as I don't have the facility's to remove it.
Likewise, gearboxes available f you can remove them yourself (happy for vehicle to be put on its side).
Single point LPG system with 2 under slung tanks + a huge one in the boot, for sale complete but only if you can remove it.
Grey leather interior.
ba05d9b581fc34a12ad80d224be60302_zpsb9eb6729.jpg


a72f398bf2dd0cf41b9440f05a2469b6_zpsac686284.jpg


a405c4de4d865e659e0ffdad2bb09a38_zps8e879f23.jpg


060be5bef31d2d9c82778218b46b6180_zps4d82c4cf.jpg


f21dbfa7c845d7d3243a87ff4d35688b_zpsee11c3f7.jpg


1f6c336a6b289da2a70401454dc93e3d_zps2dc0e2ad.jpg


755df3045d6e3f1c935d41b93e816801_zps420f1507.jpg


8037523af77872e8b74d5aacde1a61dd_zpsb457bea7.jpg


35b7b86a3a452937bb253dce6be0b915_zps683d39bc.jpg
 
Drivers and passenger side door mirrors any good?
Yes all intact

Tempted by LPG and the front seats with switches! Best price or anything you're after swap wise ?
PM sent.

Hello, do you still have the front seats and could they be modified to fit a defender 110.
Yes and possibly, you would need doing some research.

How much for the chequer plate?
PM sent.

Where in the world are you?
Near Harwich, Essex CO11
 
You should sell pretty much everything out of that vehicle!

Lots of goodies there!

How is the body for rot?

Decent bodies are worth hanging onto these days!
 
You should sell pretty much everything out of that vehicle!

Lots of goodies there!

How is the body for rot?

Decent bodies are worth hanging onto these days!

Body rot is established but could be sorted, but it will most likely to go to china in a cube :eek:

I hope to make a little out and fund some new springs and shoes for my fender.
You still selling yours?
 
Ian, its an aftermarket one (looks stainless on the back?).
I had intended to scrap the cat (got £60 for my last one), would you be happy to weld a bit of straight pipe in place of the cat?
 
I'll have look matey.
If you want to pop over one morning you can take a look and we'll sort any bits you need.
Cheers.
 
Back
Top