- Posts
- 23,075
- Location
- In the next Glen
Breaking up my disco project first lot...……...most parts were new but fitted.
Extended arches painted with bed liner paint. SOLD
Rear door ladder ON HOLD
Light bar with square spots
Front steel bumper non winch with DRLs
Used rear steel bumper
Used front winch bumper straight with no A bar SOLD
Full grey leather interior heated electric seats
Full grey xs interior half leather
CB (used)with aerial gutter mount is broken (easily fixed)
Full new set of abs brakes discs pads calipers (vented discs) ON HOLD
Snorkel kit & air filter box already blanked off & wing pre drilled if required.
Full set of doors & panels with the lock springs done (need painted as I was prepping for a respray)
2 rear quarters with standard lights
300tdi complete unit...sold
300tdi EDC refreshed engine head done new push rods new uprated timing belt kit & pully's
4 x bosch injectors New In sealed bags
2 x L230 transfer boxes with diff lock 1.2 ratio 1 sold
Full aircon system with new rad (iirc 1 pipe is damaged)
265/75/16 AT tyres sold
The shell has been welded with new boot floor inner wings new front panel rear inner
rear quarters with D2 light panels & cut for extended arches requires body work
sunroofs been filled in badly I don't have time for the body work hence why im breaking it.
Chassis seams to be unwelded & is very good.
I need to have it rolling the new suspension & rebuilt axles will have to stay for the time being.
Got loads more if anyone wants pics pm or tag me.
Located near Loch Lomond that's in Scotland.
Extended arches painted with bed liner paint. SOLD
Rear door ladder ON HOLD
Light bar with square spots
Front steel bumper non winch with DRLs
Used rear steel bumper
Used front winch bumper straight with no A bar SOLD
Full grey leather interior heated electric seats
Full grey xs interior half leather
CB (used)with aerial gutter mount is broken (easily fixed)
Full new set of abs brakes discs pads calipers (vented discs) ON HOLD
Snorkel kit & air filter box already blanked off & wing pre drilled if required.
Full set of doors & panels with the lock springs done (need painted as I was prepping for a respray)
2 rear quarters with standard lights
300tdi complete unit...sold
300tdi EDC refreshed engine head done new push rods new uprated timing belt kit & pully's
4 x bosch injectors New In sealed bags
2 x L230 transfer boxes with diff lock 1.2 ratio 1 sold
Full aircon system with new rad (iirc 1 pipe is damaged)
265/75/16 AT tyres sold
The shell has been welded with new boot floor inner wings new front panel rear inner
rear quarters with D2 light panels & cut for extended arches requires body work
sunroofs been filled in badly I don't have time for the body work hence why im breaking it.
Chassis seams to be unwelded & is very good.
I need to have it rolling the new suspension & rebuilt axles will have to stay for the time being.
Got loads more if anyone wants pics pm or tag me.
Located near Loch Lomond that's in Scotland.
Last edited:
