Hello all,
I have come across something that I thought was a great idea,
Its a Universal
Front Registration Plate Mounting Bracket.
For Driving/Fog/Spot Light & or LED Light Bar,
Allowing mounting of many different styles of lights,
fitment is only restricted to having a flat surface to mount onto,
with enough clearance above for the lights to be mounted..
The biggest issue is they are the other side of the world
Australia
And to my mind a little on the expensive side,
not so much for the item but for the delivery,
as it is a fairly heavy item to ship across the world,
So I am wanting to know your thoughts on the item,
and how much you would be prepared to part with for one very similar..
I am looking at extending the top bar to allow for up to 4x 7inch round or rectangle lights,
or a 27 inch light bar without any over hang,
The real beauty to me is the simplicity of the fitment,
being a Freelander owner I would need to remove the under tray,
and the complete front bumper to mount the standard style brackets,
the ones that poke through the bumper,
With this you would only need to remover the Number Plate,
screw or bolt this to the section behind and replace and secure the Number Plate.
A bit rough and ready but an approximate view where it would sit on a Freelander.
You will need to use a little imagination as to how it would look on your motor.
So the question is would you purchase one for your motor to fit lights to,
and how much would you expect to pay for one delivered to your doorstep,
Just a side note to consider:
They will come just as you see it above in the top picture,
just with the extended top bar and a couple of other minor changes,
NO fixings will be supplied,
due to so many different applications,
it would be impractical to try and supply all the potential types of fittings..
I have come across something that I thought was a great idea,
Its a Universal
Front Registration Plate Mounting Bracket.
For Driving/Fog/Spot Light & or LED Light Bar,
Allowing mounting of many different styles of lights,
fitment is only restricted to having a flat surface to mount onto,
with enough clearance above for the lights to be mounted..
The biggest issue is they are the other side of the world
Australia
And to my mind a little on the expensive side,
not so much for the item but for the delivery,
as it is a fairly heavy item to ship across the world,
So I am wanting to know your thoughts on the item,
and how much you would be prepared to part with for one very similar..
I am looking at extending the top bar to allow for up to 4x 7inch round or rectangle lights,
or a 27 inch light bar without any over hang,
The real beauty to me is the simplicity of the fitment,
being a Freelander owner I would need to remove the under tray,
and the complete front bumper to mount the standard style brackets,
the ones that poke through the bumper,
With this you would only need to remover the Number Plate,
screw or bolt this to the section behind and replace and secure the Number Plate.
A bit rough and ready but an approximate view where it would sit on a Freelander.
You will need to use a little imagination as to how it would look on your motor.
So the question is would you purchase one for your motor to fit lights to,
and how much would you expect to pay for one delivered to your doorstep,
Just a side note to consider:
They will come just as you see it above in the top picture,
just with the extended top bar and a couple of other minor changes,
NO fixings will be supplied,
due to so many different applications,
it would be impractical to try and supply all the potential types of fittings..
Please vote in the poll,
so I can gauge if there is any interest and what price people would be willing to pay,,
Comments & Advice are always welcome,
