Latest activity

ooops, look out, incoming angry face. (As I got). :(

agree. Im quite certain that it aint the gb after i listened with the stetoscope. No it has never been checked! that should mean its piston slap only on 1 piston...? right? I did check the tolerances of one piston i recall and it was on the...

Today I am putting the new drivebelts on as had to change the alternator last week. And it was a bit of a pain tbh which I will go into later depending on how this goes…..

How can anyone be so stupid. :( We didnt take the dogs out until 11pm last night & it was lovely n cool not a soul about what a lovely night. The male dog was straight in the pool when we came back.

I paid 1200 quid for a new one Inc labour do it it's worth the piece of mind

Drainage flap for any water that gets into the box

Edited, again, sorry @Hippo

5 and 6 are supposed to light a lickle LED light or summat, which is there but don't work as far as I can tell. But I don't need it. ;)

Well done! Tis all a mite yukky under there, of course! A bit of grease I am sure will be applied in due course!!

Mornin all. Storm gone, sun's out. Not hot yet. Gang oot tut neebs for lunch/dins. I think I'll have a shower before that, well, it is on the calendar!! 🤣 ;) Have a good day all!!!:):):)

Working on it they're still pretty solid

Had a chance to get under the disco and see what was going on, and thanks to Discool and the pic posted above 👍 I located the problem. The cable selector FTC566 had snapped at the end near the gearbox. Also the lever that attached to the...

Damn it, I completely forgot about that sierrafery… @Badger688 you will need to do at least 1 power bleed with a nanocom as I was half correct on my response, apologies!

Hi, if the TPS live readings are as they should in the ECM inputs(track 1= 0.5-0.8V at idle/4.5- 4.2V at full throttle and track 2 = supply - track 1 all the time) while TPS inputs are wrong in the ABS i doubt that changing the fuel map will help...

Dunt drink it.

I could get into that whole thing, buy a laptop from eBay, buy cables, download software etc. But why would I invest that time when it really just needs someone with the right system to fix it in 10 minutes? Almost a year ago I was talking with...

I am not really sure why you keep attacking my OBD reader when it is one of the better known brands and there are many videos on YouTube with Range Rover enthusiasts in the UK using this brand with great effect. Yes it is not the top of the...

Not seen that before👍

Morning All. :D Wow, what a different day, cool & overcast. Yesterday evening there wasn't a cloud in the sky. :) Family arriving for tomorrow's funeral later. :) Have a good day. :D

Storey Wilson does some cheap software for the early models. Later ones are canbus and use his 4Dcan software. Trying to remember what he called the earlier software. Needs a laptop and cable though. I did have it on my laptop but the laptop...

Sooo Do you know for sure you have Disco front axle? I would not go on the retaining rig as one never knows what has been done in the past. Swivel ball looks pretty good so thinking that something to do with the setup and or seal is wrong...

You said: "If your diffs new diffs fit physically." I have enough reason to believe they will fit based on the information that I have received here and another places. You said: "Your torque converter will spend more time out off lockup." The...

And the answer is...simple. At the foremost inlet port there is a small circular peg: Push the piston in a little to take the spring pressure off it and remove it. Relax the pressure on the piston and it pops out: And its now apart...

Only the pedal braking will work this way but without power bleeding the modulator once it was empty of fluid will affect the correct function of all the active braking modes(ABS, TC, EBD, HDC) cos air will be trapped between the OV's circuits...

Objection. Reported ----

Thanks. People drive at 1,300 RPM at lower speeds for long periods and have no concern for the water or oil pressure. If it was running at 500 RPM I would consider that fact, but it will be running in a typical rev range.