Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • D
    Demelza replied to the thread Discovery 1 rear lights.
  • miktdish
    miktdish replied to the thread Forum adverts getting crazy.
    I don't get any ... [edit] Sorry am on a pc not a phone ... why would you use a phone, they are for making phone calls and sending the occasional text ???
  • D
    dubloman replied to the thread Help with a Freelander 1 Diesel.
    As I am not able to get to Bolton I'm looking for someone to do the job for this person. Are you able to do the job?
  • miktdish
    miktdish replied to the thread Toebox trim ?.
    Look for the Wright Accoustic Mat system, they do everything you need. Britpart also sell it ... https://www.britpart.com/parts/seats-and-trim/acoustic-mat-systems
  • miktdish
    See your getting closer ... information is coming ... Let me write your introduction email for you. // Hello Landyzone people. This is my first post. I have a TD5 landrover from 200X Here is a picture of it with a nice background as I am in...
  • A
    Anaconda replied to the thread Starting issues.
    I hope you get some joy soon, it is a bit soul destroying at times.
  • stumpyj
    stumpyj replied to the thread Starting issues.
    Will do mate - I replaced the crank sensor last week - Ill figure out how to do some live data stuff then ill do what u suggested Cheers mate
  • kevstar
    kevstar replied to the thread I would just like to say.
    Tis ok you were drunk & that's acceptable ;)
  • Grrrrrr
    Grrrrrr replied to the thread P38 - glovebox does not close..
    Those glove boxes are an utter PITA if you disturb them. Last time I just left mine closed for 2 years and it suddenly started working again.
  • K
    Thanks for answering. It’s likely a dead end, but as the symptoms was exactly the same, even the location (Scandinavia). Will do some more digging/searching. It's a hard fault to find, two garages have been involved (non LR), Nanocom is on its...
  • kevstar
    kevstar replied to the thread I would just like to say.
    Plastering is getting done later & thats a separate job. :)
  • A
    Anaconda replied to the thread Starting issues.
    Clean all the oil around the injectors, run the purge cycle and carefully watch for any diesel leaks around the injectors. In my limited experience leaking injectors doesn't stop it from starting a bad crank sensor or interference from a bad...
  • Grrrrrr
    Grrrrrr replied to the thread P38A 2 P38 diesels.
    Go on, you know you want to!
  • kevstar
    kevstar replied to the thread I would just like to say.
    36 sockets & switches, new fusebox & everything else that goes with it. House empty & all floor coverings have been removed. Yes all certified but still sounds an mighty high price me is thinking he doesnt want the job so has priced it high...
  • stumpyj
    stumpyj replied to the thread Starting issues.
    Cheers for the reply. Ive just been down and cleared all the codes have all stayed off (they must have come on when the injectors were removed). I turned her over again and all of the cylinders were showing readings like (1,2,3,4,5)...
  • kevstar
    kevstar replied to the thread I would just like to say.
    The saying get yer hedgehog out doesnt have the same ring to it. 🤣
  • A
    Anaconda replied to the thread Starting issues.
    If you can see diesel then the seal must be leaking or the head is cracked surely. I don't think that would stop it from starting though.
  • miktdish
    Lets hope so after almost 8 years .... in fact the OP hasn't bben seen since Nov 2017 either. The best thing is to goto 'Introductions' say a few words and then open a new thread with your symptoms and requests garnished with a couple of photo's ...
  • stumpyj
    stumpyj replied to the thread Starting issues.
    Also ECU status is "non Robust" - this makes sense because this was deactivated 5 years when I had an intermittent fault with the AS10. There is power to the injectors now. I have the rocker cover off and when I was turning it over (just a...
  • JokerUK
    JokerUK replied to the thread Toebox trim ?.
    ah yes I can see the carpet thanks for that
  • discool
    discool replied to the thread Discovery 1 rear lights.
    Rear fog lamps are the bottom segment of the body mounted units, tail lighting along with indicators are above, a standard as it left the factory. Rear bumper is just indicators and tail lights in both units, again as it left the factory. So...
Back
Top