Latest activity

Send it back.

Agreed, if the assistant is pumping the pedal with the bleed nipple open, every time they lift their foot air gets in.

A other Nissens or a full alloy rad? From my experience a lot of the better names in parts have changed a lot in ten year regarding quality 😔

Morning All. :D A bit of crash-bang-wallop from the skies at midnight, cool & damp now. :) No plans ATM for today. I really did get burnt on the cycle ride yesterday. :( Down a bit more on the diet, so I shall keep going. :) Have a good day! :D

I call Click bait!

Having recently gone all modern and bought a 2001 D2 I’m having a senior moment with the air con controls, I’ve only been able to get it working on full blast, whilst the fan symbol on the display increases each push of the button no air comes...

Good man. Carry on ignoring and let us know how you get on.

Head overtemp alarm went off on the way home but needle bang on 12 o'clock. Reversed into the drive to clouds of white steam - sh1t! Radiator cracked along the top and ****ing coolant. That's a Nissens one that has been on maybe 10 years.

It's good stuff, used it on our last caravan.

Thanks for the part recommendation. Looks good. I'll check the pulleys again this morning. Quick guilt thought: 3-4 weeks ago I noticed the coolant was low in the reservoir and topped up with a small amount of straight water! Since then I've...

https://store.reaseheath.ac.uk/short-courses/engineering Reaseheath occasionally do short courses on vehicle maintenance, but skimming they dont have any at the moment. I did their welding course last year which was ok.. but missed a lot of...

Make yerself some HippoRamps (TM) https://www.landyzone.co.uk/land-rover/hipporamps-how-to-guide.257760/

Thanks Arctic and Nodge, I can now get the correct service kit, cheers

Worth trying a caravan forum???😁

Very nice! 😎. That would make a great rolling project, not that much needs doing. I’d be in some turouble if I bought another though!🙄. Good luck with the sale, it’s a great looking Landy.

Nothing like learning on the job, so to speak. A decent selection of tools, some workshop manuals and you tube are very useful.lots of good help and advice on here too.

So...gotta love the series 3 esp when it throws an issue at you. My most recent is starting. When it does start it's great, loads of power etc. But recently after driving it it sometimes (once every two weeks) turns over really slowly like its...

If no price stated, then the first bidder gets it. I bid a half eaten Mars bar and the foil from a kit-kat.

what price you looking for?

If I can’t drill with manifold in place I might try these…https://ebay.us/m/xUHvXw

ignore me, just saw it was last year. -.-

Alright, Names Luke, 35, lincolnshire and I’ve got a discovery 2 td5. Bought it sept 2023, was in a poor state and falsely lead to believe it wasn’t as bad as it was. Had no recourse so just cracked on to get it a fresh MOT, roll around 1.5...

Thanks, I must admit I was on a Defender tour towards the end of production (2016?) and enjoyed it. I wish I'd ordered one of the run out models to lock away. We'll probably book Solihull.

I wonder if someone can help - I have no issue with a car, but I noticed there is an permanent DTC from BCM about Central Configuration. Looking at CCF sessions, I was working on GWM CCF all the time and I can see BCM has `Vehicle backup...

Metal cable ties .. will do the job 😊

Now days you can have locking wheel nuts, for me that since 1976.😀

I got an AIRTEX 6395G a few years ago £58 , did you check the pulley wheels are tight , and no side play 6 mile should be ok

So what is it an alarm/immobiliser issue or super locking issue, if the latter then you in trouble as non of the doors can be opened from outside or inside without using a functioning remote.

I’ve only done one factory tour, although not recently and that was at Ford’s factory at Dagenham, so, starting with an Intro presentation then on to the engine building line, then on to the spray shop and then to the assembly line. 55 minutes...