Latest activity

I've never had a Freelander but there's plenty on here who think they are the best thing since sliced bread, so you won't be short on advice and support :)

I put a tea spoonful into a cup, couple if it’s a flask or my old bottles. Might work 👍

Hi, you have to use a nanocom or hawkeye to make sure tat te ECU is not the problem even though it must get above 250rpm input to start coded how? can your diag tool make the ECU learn the security code?

Go with nanocom In BCU - Settings - Alarm/others - 4'th page and make sure that Cruise control appears as "Enabled"

The pipes are good and the distributor is a new powerspark unit so maybe it’s faulty, I still have the old one so will put that one back in just to check

Three of em.. In a toob.

Awful. BBC News - Verified video shows Air India plane descending moments before crash - BBC News https://www.bbc.co.uk/news/videos/cy4kxq9e9gqo

Thanks Been watching a few vids , and guides seems people have there different ways, on this vid he puts sealer around the outside of seal in the housing, few others do it to. Gonna try my local landy shop hoping they have a better seal and...

Thanks a mil. Will be tapping your expertise as we go along

Welcome to the forum @gencybay @Def90man

Thanks yes. Agree, ill have a go tomorrow afternoon and see.if i can drive a tappered drift through to raise the paul, if i can do that ill make a tubular tapered tool with a split in to feed through in front if the cable shaft to get it back...

Hi When I engage the handbrake on my FL 2, a squeeky noise comes from the rear brake drums. Any suggestion what the cause could be and how to get rid of it? Appreciate your comments.

Just introducing myself as I have just joined you guys. I live in South Africa and have a 2013 Freelander 2 2.2 SD4 with 235 000km on the clock. Have not had any issues except the turbo adjuster that had to be replaced. Other than that...

Just seen the plane crashed in India :(

The nissens I had did indeed have a baffle, doesn’t necessarily mean yours does, missed in manufacturing, sent wrong one there’s many reasons. Usually we do Wammers test - turn it upside down and try to roll a marble through the top before...

Is that a tennis ball in yer pocket or is he please to see you. 🤣 🤣

Machine is busted needs a turbo, so that will be 2k please thank you very much.

Theres a stupid amount of it, I counted 27 pallets this morning plus 2 x 1/2 full mini skips of it. The bigger blocks are 14kg each and its still coming out. :oops:

I had the same…..both 2 year old, 1000 road miles,Britpart shocks failed. I bought some others off EBay…sorted. I did send an email to LR Centre, where they came from, but no reply! Shame really as I bought loads of things from them.

Maybe they have cataracts and can't tell the difference 🤔

I had a problem with my pedals! Water had come in and screwed the main pedal shaft! So the actuator was not engaging with the cruise control or the brake light! Because of the rust around the shaft (see pic 😮) After changing! No more problems ...

Looking at the state of some people's screens on a frosty misty morning as drive to work/school run that's more than good enough to see out of !

Why do anything, I spose. Probably better to have stopped all development here

Ok rad on top is roasting The rest of the rad is cold Hose on battery side is lukewarm Hose on other side is extremely got

This is the state it was before.

Your D3 must be different ☹️ if set, the cruise control will disengage if the brake or clutch pedal is pressed.

Youtube is a very good resource to help tackle a lot of DIY jobs etc these days. Ultimately as a lot of people say Land Rovers are just giant meccano sets, everything is just fixed together in one way or another and can be unbolted etc. I've...

It's an 06 L322. I still have a roof over my head and both kidneys so somehow doubt it was genuine. Still the wrong side of 500 fitted though. Did test the rain sensor was fitted right by squirting a bit of water onto the sensor position and...

Voltage readings are not the be all and end all of how well an wire delivers power, if it can not supply sufficient amps things will not work. This goes for any other connection such as the spade connection on the starter. Poor connection, no...