Latest activity

Hi that’s fantastic thanks very much most helpful

Hi, what kind of scanner was used? if you hardwired the sensor to the ECU and you still get the fault code for it you have to read live sensor inputs with stationary vehicle cos there are cases when the fault code doesnt match with reality and...

erm ... next time i disconnect my handbrake ..... it poped out wihtout issue now :vb-groan2:

Morning All. :D Woken up by the need to P loud rain on the roof at 5AM. :( Still raining now. Forecast said overnight but gone by daytime (Liars!). :( Have a great day! :D

Hello everyone . I own a 1987 110 , this is a ex mod and came with a bikini top , it had 2 rear facing seats . I installed a truck cab onto this “not sure what it came of “ the other day when pushing a coat behind my head rest, my drivers side...

Mornin Lovely sunny start to the day Takin GF to hospital in Aintree this morning, taking the Freelander for a run. 🤔:) Hopefully get a couple of flags laid this afternoon . Hope it stays fine Stay busy all :)

No idea about LOF, have not used them. I have replaced mine with the standard servo/master. Noticeable improvement over the old.

100L added to me water butt anorl. Gorra go. Wuk to do.

Wevver said yesdi we were having a few mm of rain per hour over night. Hurd some ovvit start. Just bin out to replace nuts. Me saucers on top ov me empty pots have an inch of rain in them.

Hi all Wonder if someone can help with a brake set up challenge I’m having (sorry for the long post). A bit of background, I’m rebuilding a late S2 109 on a new chassis, in part using bits from a knacked S2 88’’ (1969) I had lying around. I’ve...

My family are in exactly the same boat, I'm in the trade and am trying to support my relative who bought a Freelander despite my reservations. Auto box failed at 200,000, confirmed by a LR specialist in Durham. My relative sourced a used auto...

Thank you 👍

Thanks for the reply. I'll move them in a bit then, more central to the quarter panel or a ⅓ in? I've fitted the reflectors onto the crossmember at the outermost points, as that's where they were previously.

yes

Yes, I already did it, but nothing help.

Thanks for the suggestion. Can you confirm if the LOF kit and Master cylinder kit I initially mentioned are compatible? My car doesn't have ABS.

22nd April 2025, Just appeared on Autotrader. Never seen a 2016 plate Freelander?

I have a 79 Series 3/Santana I’m working on. Discovered the block was welded sometime in its past. Looking for help understanding the numbers on the block. Also, it’s clear the engine got very hot at some point in this past, possibly what led...

Hi guys having some problems with typical 3 amigos. Trying to get her in for mot but seem impossible to get them out. previous owner had code thrown for rear pas sensor, Been replaced and lights remained Replaced again with hard wired to the...

Hi guys reading up on your post and i am having a silmilar sort of issue with the abs and can’t seem to get them cleared. Have replaced everything can think of and lights are still remaining. Any help would be greatly appreciated Cheers...

Hi folks, at my whits end here and wondering if anyone can help. My 93’ LSE has developed a no spark issue and I cannot for the life of me solve it. So, I’ve had issues with the ignition amp overheating in the past hence I have fitted one of...

Bummer.

Double check the earth strap from block/gearbox to battery. Grab your jump leads and connect one from battery to the block. Try to start it again to note any improvements. If its still clunking from the solenoid hold the switch to "start" for...

I had My missus with her foot on the brake, me with my foot pushing the socket on the hub nut, and my 16 stone son on the end of the torque wrench.