Latest activity

Not usually. It would be the one that is mounted on the starter motor casing. Many moons ago, I had one where the main copper cable inside the solenoid had cracked, so I took it apart and splinted that heavy cable. It really would be easier to...

Heavy mate & long bar ?

It's a brand new starter motor, fitted to replace the old one that went click twice on two separate occasions. I tried thumping the old one with 'MY' special tool. A lump hammer. It had no effect. I see from the wiring diagram there is a relay...

After my rebuild I ran mine with just the cats. It was good but . . . . . . .

do not know how much they will look at a UK reg car but think they get stopped more than before as looking for cars that are there permanently, but still have UK plates these cars are normally SORN with a French CT which no one cared about too...

Have you had a read of this below https://www.landyzone.co.uk/land-rover/2006-facelift-td4-auto-turbo-vacuum-boost-solenoid.391717/

Some more pics in here https://www.landyzone.co.uk/land-rover/brakes-jacking.368906/ And you'll need a 450nm torque wrench.

If I remember correctly I was just doing the CV boot but the joint has to come off anyway.

Having stitched half of year 2003 V6 auto loom into a year 2005 1.8 K series, yes they do. The wiring diagrams were pretty much faultless.

That assumes LR use same colour on diagrams & wires !!

It will be noisy, but sound good until the wife & neighbours complain !

Bring the fog/reverse in a bit(if you have handle to affix) Also need space for the red reflectors for MOT

Got a better idea. I'll go out now and try it. It's dark :D Headlights on, key turned and lights didn't dim. Soooooooooooo, is that good or bad? Which bit do a smack with a hammer/replace? Or smack with a hammer and THEN replace...

Thanks for that. Looks so much better in colour!

I suppose anything is possible, but i would have thought in this case probably not because if you mean the solenoid on the starter motor, that would have had to fail on the old one and then on the brand new one i just fitted. If you are talking...

Looking good, above the bumper mine is, but don’t have reversing light, want to make sure wiring comes into the little covers inside tub

Hello everyone I have just picked myself up a 1999 P38 4.0 The previous owner has done a back box delete , but not very well the exhaust has seen better days, could anyone advise me on some stainless steel alternatives? And is it wise to do a...

Dead easy just need a couple of tools :) Got some more pics when I can find them.

Nearly lost the will to live Friday and Saturday. Tried connecting up the new wiring loom, but being totally colour blind made the task impossible. Gave up in the end and am taking the OH's advice and finding an auto electrician. Still, I...

You must be hankering for another P38 by now? https://www.landyzone.co.uk/land-rover/p38-2-5-dse-spares-or-repairs.397734/

I'm a little surprised there hasn't been more interest.

Cat got me up at four, morning's are getting lighter !!!!! Soon be three 😴😴

Pin 7 of the OBD connector should go to pin C0603-3 of the TD4 engine ECU. I'm pretty sure it will be a pink wire.

Safe journey don't get a flat 😐

I done a favour for a chap today & his mate was kidding me on about giving me 2 sovs for my lamp post having a joke as he really wants it, (been asking me for weeks for it) then his mate turned round n said ive got one of them lamps at the back...

Thats hippo & his crew 🤣 🤣 I see you've removed the R 🤣🤣

Take your pick ---

Been told that someone tried to break into a house just up the road, plus some peeps in gardens in the the next village stealing stuff. :mad:

It’s not AG, so I won’t 😉

out pottering around today and visited a friend, was in for a cuppa and a blether about 2 hours in total, came out to landy turned key and nothing, completley dead, stuck jump pack on her and she fired up straight away, drove home about 5 miles...