Latest activity

Has anyone fitted a fuel pickup (in tank) filter to their diesel Landy? I’m replacing the fuel line soon and can see this being a worthy upgrade. Just wondering what others have used, if they have.

Baby Bay near Polzeath down in Cornwall.

I have a D1 mate, live in Blackpool, if it’s any good to you more than welcome to come over and take measurements from mine to make reference points. Mines had quite a bit welded up round that area too, and closes fine. If you want any...

Stocks n shares in wellies was at an all time high 🤣

It were world sheep day yesdi. Appy dreams.

Another reprobate seaching for Freelandering freds.

👍

I won’t fit in my shirts after another round at that cafe! They have just built an extension on the place to seat more people , so I’ve heard 🤣

Tell them you won't be back again diy or find a non rip off garage

Got a new negative earth lead for the battery to chassis and gearbox. Just need to fit it now.

Looks like the Wurzels know how to rook a Landanna! TBH I expect that was one of the smallest parts of your bill.

Hi All, I'm trying to get the rear of my Disco 300tdi straightened up and I want to make sure I'm getting it back to the correct spec when it all goes back together. The rear cross member has always been a bit 'spongy' and I was aware of the...

There is a nut and thread adjuster at the rear of the centre console for a quick fix, pop up the reartray to access just ensure handbrake is off before adjusting.. But given the age of any FL2 the brakes themselves could probably do with a service.

If you want to know something about a Freelander ask in here - https://www.landyzone.co.uk/forum/land-rover-freelander.9/

In green too…loverly. Can’t say I’ve ever seen one with 300tdi. I’d be interested to know how you get along. Welcome to LandyZone

F*** ***! 😱 I don’t believe it

Very nice, what beach is that?

I'm, bumping this old thread because I think it's what I'm supposed to do. It's the same issue but I've only just managed to return to it. In brief, I just replaced the pressure regulator valve thing in the fuel pressure regulator and it didn't...

Took her for a spin down on to the beach 👌🏼

I would have thought when in park ,take wiper arms of put in New park position then thay will travel further to the right my need a puller to get them off

Will do pal

I think they lead to the other end of the wires that the plugs are on. Why don't you trace where they go to and report back. We may then have some idea what they may be for.

Maybe the couple on their phones were desperately trying to not catch your eye, so you wouldn't bore them to death with tales of how brilliant you are at everything and are the bestest ever, people often say how good you are, all the time, your...

In most cases, OEM means nothing these days if the brand is not clearely mentioned, it's just a marketing scam, the only reliabe suffix is LR for the genuines and those parts are coming in the LR box

Well that's it, yessdi's theatre trip was the last of the season. As usual before the performance we had lunch in Cote brasserie. We are regulars there. We pushed the boat out knowing it was the last one, and didn't limit ourselves to what we ate...

1996 Defender 90 SW Wipers run fine, park OK, both speeds work, but they park too high up the screen and don't wipe far enough to the right. It will probably pass the MOT next month OK, but what do I need to fix so they swipe a proper arc ...

Whoopi so some good news on this subject, returned to my friends today with second hand newly cleaned injector removed the old one No3 which was once again caked in black oily deposits, and was quite hard to remove due to sticking again, cleaned...

Lucky him. I have heard that the later ones, the original buyer could specify one. The earlier ones had the bits but no connection as they felt the mechanics working on them would like them to be there but the drivers should rely on traction...

Changed the ABS shuttle valve today. Absolutely hate doing this job, wouldnt be so bad if it was easyto get my wings off 🙈 Through the hole it is! Took about 3 hours and some cut wrists Finally out and replaced with a pre modified one which...

Appreciate the info 🙏 I'll check it out tomorrow