your thoughts on this wheel bearing?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes it's cheap but it has Been made up by quality bearings and sensors?

What you reckon it's no good?
 
The guy has got good feedback and you do have some protection on ebay - probably right up till when you use it! His history shows hes sold others and buyers have been happy. In your position I'd probably give him a go.
 
God thats scary seeing how a 1 axle set for a 200/300 is around £40. Like said above thou seems to have good feedback and other that have bought seems happy go for it lol
 
Just had a look around. I have already replaced two TAY100060 front wheel bearings (at about 94,000 miles), and also one of the rear bearings (one rear bearing is still original at 174k miles). I'll bet I'm not far off another expensive wheel bearing soon!

There's a lot of the LR parts suppliers now offering pattern-parts for TAY100060 - when I needed one last time, I called Ashcroft Transmissions and asked if they could consider an advance-replacement for reconditioned parts of these - that sounds like a great business opportunity to me!

I for one would suggest it's worth a go. Assuming you're saving one-third of the cost it's worth a try...if you get over 60,000 miles you're onto a winner.
 
You must log in or register to reply here.

Similar threads

rich28uk
L322 Wheel bearing or something else
Replies
13
Views
2K
rich28uk
rich28uk
cappers
Wheel bearing or CV joint noises
Replies
9
Views
2K
cappers
cappers
The Green Beastie
After getting an oil change, I now have to change a wheel bearing
Replies
10
Views
1K
The Green Beastie
The Green Beastie
D90 Td5
Defender Td5 Wheel Bearing Issue
Replies
9
Views
2K
Brown
Brown
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
Back
Top