WTD : - Range Rover 3.5 Exhaustr Manifolds

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

Lee_D

Guest
Percy is in need of some bits and time is now of the essence. (MOT due on
the Alfie (Rangie) shortly and I want to complete the sills on the Drivers
side before he goes in)

SOOOO manifolds of the type found on the pre EFI engines.. I.E. 3.5 carbed
engines

Paypal waiting for reasonable price and postage.

Cheers,

Lee D



--

www.lrproject.com

Workshop photos from Landrover repairs
& other such tinkerings.
Home of Percy the Jag powered Landrover


 
On or around Wed, 09 Feb 2005 19:17:23 GMT, "Lee_D" <[email protected]>
enlightened us thusly:

>Percy is in need of some bits and time is now of the essence. (MOT due on
>the Alfie (Rangie) shortly and I want to complete the sills on the Drivers
>side before he goes in)
>
>SOOOO manifolds of the type found on the pre EFI engines.. I.E. 3.5 carbed
>engines
>
>Paypal waiting for reasonable price and postage.

just scrapped some a few weeks back here. bummer.
--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
Blue: The sky is blue for a reason. Blue light is a source of strength
and harmony in the cosmos. Create a blue light in your life by
telephoning the police
from the Little Book of Complete B***ocks by Alistair Beaton.
 
Lee do you need front pipes and y peice got some that are usable in
Birmingham From 3.5 efi
"Lee_D" <[email protected]> wrote in message
news:[email protected]...
> Percy is in need of some bits and time is now of the essence. (MOT due on
> the Alfie (Rangie) shortly and I want to complete the sills on the Drivers
> side before he goes in)
>
> SOOOO manifolds of the type found on the pre EFI engines.. I.E. 3.5 carbed
> engines
>
> Paypal waiting for reasonable price and postage.
>
> Cheers,
>
> Lee D
>
>
>
> --
>
> www.lrproject.com
>
> Workshop photos from Landrover repairs
> & other such tinkerings.
> Home of Percy the Jag powered Landrover
>
>


 
"Paul Coley" <[email protected]> wrote in message
news:[email protected]...
> Lee do you need front pipes and y peice got some that are usable in
> Birmingham From 3.5 efi

I will do but I'm not sure if the manifolds are the same...any one?


Lee D


 
> SOOOO manifolds of the type found on the pre EFI engines.. I.E. 3.5 carbed
> engines

> Cheers,
>
> Lee D

Where are you?

 
"Dougal" <DougalAThiskennel.free-online.co.uk> wrote in message
news:[email protected]...

> Where are you?
>

I'm upstairs in the spare room

;-)

Staffs M6 Junct 15 (UK) Also known as Stoke on Trentish

Lee D


 
>>Where are you?
>>
> I'm upstairs in the spare room
>
> ;-)
>
> Staffs M6 Junct 15 (UK) Also known as Stoke on Trentish
>
> Lee D

Pencil me in as your last resort if stuck. I have a complete dead engine
with those manifolds which is in the way. I'd be happy to remove the
manifolds but couldn't be chewed with arranging shipping etc..

I'm in Durham and am likely to be passing your way (well, north and
south on A38 to Lichfield) shortly after the Easter holiday.

David

 
"Dougal" <DougalAThiskennel.free-online.co.uk> wrote in message
news:p[email protected]...
> Pencil me in as your last resort if stuck. I have a complete dead engine
> with those manifolds which is in the way. I'd be happy to remove the
> manifolds but couldn't be chewed with arranging shipping etc..

<snip>

Cheers, will do. I'm hoping for a quick fix on Percy but may well call on
you yet, my quick fixes have been known to take several years but I remain
hopeful.

Lee D


 
On Wed, 09 Feb 2005 19:17:23 GMT, "Lee_D" <[email protected]> wrote:

>Percy is in need of some bits and time is now of the essence. (MOT due on
>the Alfie (Rangie) shortly and I want to complete the sills on the Drivers
>side before he goes in)
>
>SOOOO manifolds of the type found on the pre EFI engines.. I.E. 3.5 carbed
>engines

There are a pair of em on ebay. still only 99p at the moment. item
number 4526836969 (stick this in the search box and they come right
up)
 
Hi Lee, I know of a couple lying around in my mates workshop, do you still
have my mobile #?
I'll give him a call tomorrow but would estimate £20-£30.

Regards, Roy. (WV14)

"Lee_D" <[email protected]> wrote in message
news:eKuOd.6541$Z%[email protected]...
> "Dougal" <DougalAThiskennel.free-online.co.uk> wrote in message
> news:p[email protected]...
>> Pencil me in as your last resort if stuck. I have a complete dead engine
>> with those manifolds which is in the way. I'd be happy to remove the
>> manifolds but couldn't be chewed with arranging shipping etc..
>
> <snip>
>
> Cheers, will do. I'm hoping for a quick fix on Percy but may well call on
> you yet, my quick fixes have been known to take several years but I remain
> hopeful.
>
> Lee D
>


 
"LR90" <[email protected]> wrote in message
news:[email protected]...
> Hi Lee, I know of a couple lying around in my mates workshop, do you still
> have my mobile #?
> I'll give him a call tomorrow but would estimate £20-£30.
>
> Regards, Roy. (WV14)

Cool, I've lost your number several formats back :-( , rather than trying to
despam my email then you can send it via the email link on the site below.
Been down your neck of the woods for the last 3 days on exercise (RAF
Cosford) spooky that!.... well it's closer to your end than mine anyway :)

Lee D
--

www.lrproject.com

Workshop photos from Landrover repairs
& other such tinkerings.
Home of Percy the Jag powered Landrover


 
On or around Wed, 09 Feb 2005 20:32:34 GMT, "Lee_D" <[email protected]>
enlightened us thusly:

>"Paul Coley" <[email protected]> wrote in message
>news:[email protected]...
>> Lee do you need front pipes and y peice got some that are usable in
>> Birmingham From 3.5 efi
>
>I will do but I'm not sure if the manifolds are the same...any one?

depends if they're the single or double downpipe type.
--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
0123456789112345678921234567893123456789412345678951234567896123456789712345
1 weebl: What's this? | in recognition of the fun that is weebl and bob
2 bob: it a SigRuler! | check out the weebl and bob archive:
3 weebl: How Handy! | http://www.weebl.jolt.co.uk/archives.php
 
efi has 2 pipes from manifold i think but not sure carb has one let me know
Paul
"Lee_D" <[email protected]> wrote in message
news:CruOd.6449$Z%[email protected]...
> "Paul Coley" <[email protected]> wrote in message
> news:[email protected]...
> > Lee do you need front pipes and y peice got some that are usable in
> > Birmingham From 3.5 efi
>
> I will do but I'm not sure if the manifolds are the same...any one?
>
>
> Lee D
>
>


 
In message <[email protected]>
"Lee_D" <[email protected]> wrote:

> Percy is in need of some bits and time is now of the essence. (MOT due on
> the Alfie (Rangie) shortly and I want to complete the sills on the Drivers
> side before he goes in)
>
> SOOOO manifolds of the type found on the pre EFI engines.. I.E. 3.5 carbed
> engines
>
> Paypal waiting for reasonable price and postage.
>
> Cheers,
>
> Lee D
>
>
>

New ones arn't *that* expensive (cough!).

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems
 
"beamendsltd" <[email protected]> wrote in message
news:cd97f03a4d%[email protected]...

> New ones arn't *that* expensive (cough!).


Goarn then what would the damage be for a sparkly set? I'm assuming the 90 /
110 set up is single pipe rather than dual if only to reduce clearance
problems in the SIIa chassis. Given I'll probably end up fitting a sawn off
110 unit then this is probably the simpest option.

If they are little more than postage and costs It'd make sense to fit new as
I'll then no doubt need new studs fitting too to an old pair.

Lee D


 
In message <[email protected]>
"Lee_D" <[email protected]> wrote:

> "beamendsltd" <[email protected]> wrote in message
> news:cd97f03a4d%[email protected]...
>
> > New ones arn't *that* expensive (cough!).
>
>
> Goarn then what would the damage be for a sparkly set? I'm assuming the 90 /
> 110 set up is single pipe rather than dual if only to reduce clearance
> problems in the SIIa chassis. Given I'll probably end up fitting a sawn off
> 110 unit then this is probably the simpest option.
>
> If they are little more than postage and costs It'd make sense to fit new as
> I'll then no doubt need new studs fitting too to an old pair.
>
> Lee D
>
>


LH 123.37 inc VAT (ahem.... )
RH 55.22 inc VAT :)

Free set of studs, nuts and gaskets......

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems
 
"beamendsltd" <[email protected]> wrote in message
news:9412a3b4d%[email protected]...

> LH 123.37 inc VAT (ahem.... )
> RH 55.22 inc VAT :)

<THUD>

"Mr Davies....... Mr Davies.......Ok everyone get back and give him some
air"

<Several minutes later>

Cheers Richard , I'm suddenly feeling an overwheelming need to be
environmentally friendly and recycle some old ones, shame to waste them and
all that.

:)

Lee D.



 
"Lee_D" <[email protected]> wrote in message
news:[email protected]...

Just a quick thanks to all those who replied, got a pair at a fair price and
*hopefully* delivered to the door. The wonders of ebay :0)

No then wheres that hoist ..... ahem.

Lee D


 
You must log in or register to reply here.

Similar threads

L
Wtd: 101 Starting handle and jack handles.
2
Replies
26
Views
3K
Alex
A
L
MOT's on line.
Replies
0
Views
1K
Lee_D
L
L
Bolts for Water Pump - 101
Replies
11
Views
2K
Steve Taylor
S
L
October Unofficial
7 8 9
Replies
164
Views
11K
Mother
M
L
Oi Rich.
Replies
3
Views
760
Lee_D
L
Back
Top