Wiring up a work light

G4ZZ · Apr 19, 2019

I have a freelander and I was going to fit a work light.
I have a harness with relay, in-line fuse and a switch, I was going to run the harness from battery and through the bulkhead it I’m having trouble passing it through.
Is there any thing else I can pick a live up from?

dieseldog69 · Apr 19, 2019

G4ZZ said:
I have a freelander and I was going to fit a work light.
I have a harness with relay, in-line fuse and a switch, I was going to run the harness from battery and through the bulkhead it I’m having trouble passing it through.
Is there any thing else I can pick a live up from?

Use your multimeter and depending on whether or not you want it to work with the ignition on or off check to find a feed off the back of the fuse box to suit.

PS if you don't own a multimeter then you should get one.

Nodge68 · Apr 23, 2019

G4ZZ said:
Is there any thing else I can pick a live up from?

How many Amps does your work light pull? You could tap into the interior light, which has a constant live feed, on a 10 Amp fuse IIRC.

Wiring up a work light

G4ZZ

New Member

dieseldog69

Well-Known Member

Nodge68

Well-Known Member

Similar threads