wiring kits for light bars

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Not quite the same but when I bought my big spotlamps from them there was no wiring kit.But...its simple enough if they dont send one,your local motor factor will do one,most like,if not, its not hard to do yourself with an in line fuse,some crimps and a 40 amp-ish relay....Im sure theres a wiring dia somewhere on here,if not...the mighty google;) :)
 
GamekeeperJames said:
hi, just ordered this from paddock spares Discovery 1 Light Bar - with 4 Wipac rectangular lights

after ordering i just suddenly had the thought, oh bugger i wonder if this comes with a wiring kit. well does anybody have any experience with these?

cheers james
Click to expand...

yes 2 things, make sure u dont have just one battery otherwise it wil kil it with those lights, and secondly do it yourself its a piece of cake to make a little relay with a switch and you can out the switches where the electric window buttons are i assume from the photo u have a 200 tdi its childs play feeding wires around it as theres plenty of space behind the dash and consoles
 
nah, being pregnant/poor kinda puts a stopper in things,

James, good on yah, i got two tbh, one per side so i could have a little more control. And before you ask how there wired, mine are done so the only way they can come on is if the main beam is on, but seperatly switched so i dont get in trouble flashing plods on
 
i was thinking that but now i think i will just wire them too a switch so i can turn them on or off. alot less hassle wiring up and if i wont them on with the main beams, il just flick a switch. you say you didnt need a second battery for all your lights?
 
TheVengefulElephant said:
I would of thought it's quite important to know depending on who's about! :eek:
Click to expand...

Your body has a far better built in inclinometer than some pieace of plastic crap. They are the single most pointless bit of kit ever marketed. The last thing you want to be doing if you might be pushing it too far is looking at a bluddy gauge to have confirmed what your body & vehicle are already telling you.

Every time I buy a Landy it's got one in it & everytime the first thing I do is tear it out and stamp on it! :D

Jest my opinion of course.

Other kinds of pointless kit are available. ;)
 
You must log in or register to reply here.

Similar threads

C
Warning Light for WIPAC indicator module not lighting up.
Replies
1
Views
717
miktdish
miktdish
wills
P38A Range Rover 1998 (R reg) - P38a - 2.5DSE - Range Rover for sale...
Replies
1
Views
304
wills
wills
A
Help Needed - Freelander 1 facelift front fogs
Replies
6
Views
554
Nodge68
Nodge68
ChrisBduck
3.6L Land rover 90
Replies
2
Views
2K
ChrisBduck
ChrisBduck
K
What money should I be asking?
2
Replies
27
Views
6K
Karls
K
Back
Top