- Posts
- 1,855
- Location
- Selby, North Yorkshire
On a split screen series is it an MOT fail just to have a wiper at the drivers side?
Wipers
- Thread starter Cabbie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,310
- Location
- Embasinga stocæ
Aw cummon, Cabbie - wossa ns windscreen wiper gonna cost? gerrit fixed and have done
.
.
Davec
New Member
- Posts
- 2,131
Aw cummon, Cabbie - wossa ns windscreen wiper gonna cost? gerrit fixed and have done
If it's the separate motor type, quite a bit, after you've found one!
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
An MOT tester can not fail a car under the "If it's fitted it must work" rule. The MOT manual is very specific as to what constitutes a fail and if it isn't classified as a fail then it's a pass. there is no ambiguity whatsoever. There are plenty of links to the online MOT testers manual. That you can lookup to see if the tester was right to fail your motor.
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
clivees
Well-Known Member
- Posts
- 2,070
Dont need one on the passanger side but if you have one it must work.
Not too sure if you need one at all on any side.
Not too sure if you need one at all on any side.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
- Posts
- 1,855
- Location
- Selby, North Yorkshire
O.K. what's happened is this. Previous owner fitted new bulkhead during unfinished restoration. There are three holes for wiper bosses. the driver one is ok but he mounted the passenger wiper boss in the hole nearest the centre screen divider. Consequently when the arm and blade is fitted it bounces over the divider when mounted one way and bounces over the windscreen pillar in the other position. Do I just need o remount the boss in the hole nearest to the windscreen pillar?
I can understand all that drivel, just hope you can.
I can understand all that drivel, just hope you can.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
do you have a roof fitted? if not fold the screen down and it will pass as the wipers are n ot a testable item if the screen is down
- Posts
- 1,855
- Location
- Selby, North Yorkshire
It's a 109 station wagon so yes there's a roof
stewyinpagham
Member
- Posts
- 66
- Location
- Fareham Hampshire
Can't you fold down the screen for the MOT.?
"Drivers view of the road" is then perfect.
"Drivers view of the road" is then perfect.
stewyinpagham
Member
- Posts
- 66
- Location
- Fareham Hampshire
I know you said it allready.
Note to self..Must read all posts.
Note to self..Must read all posts.
stevetd5
Member
- Posts
- 42
Hi all I have just acquired a series 2 and was wondering if anyone is aware of a windscreen wiper/blade upgrade asI am planning on keeping it at a wet part of Aust.
- Posts
- 1,855
- Location
- Selby, North Yorkshire
Nobody really answered this bit. It's got a single wiper motor and the arms travel in same direction. As above, will they work if I shift the neaside boss to the hole nearest the door pillar.
- Posts
- 83,310
- Location
- Embasinga stocæ
i reckon yu might be leading the field there, Cabbie - let us know how you get on .
.- Posts
- 1,855
- Location
- Selby, North Yorkshire
i reckon yu might be leading the field there, Cabbie - let us know how you get on
Will do. Am going to post it in Series 2 Club forum. Someone on there must have come acoss this problem before.
Similar threads
