windscreen seal replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Karlos28

Karlos28

Well-Known Member
Posts
1,894
Location
Derbyshire
hi there, my mates hcpu has a slightly leaky windscreen seal and wants to get it sorted ASAP to stop any (more) water getting into the bulkhead.
but we dont kno how to go about it.. do you need one of those seal remover tools? is it bolted in?
any help would be great1

ta
 
Standard 90/110 windscreen can be done by pealing/knifing seal out.
To replace use 3.8 mm starter cord from memory to pull screen in lube with window cleaner and not washing up liquid on seal-work from centre and don't be tempted to push corners in until rest of seal in.
 
Last edited:
do you mean seal around window or above frame or below between bulk head and frame,window seal can be prised out ,but sometimes cutting with stanley may help ,and refitted with plenty of washing up liquid,get genuine seal
 
Replacing the screen or seal is the one job I pay an expert to do, my local independant windscreen fitter charges £10-£15 so why risk a cracked screen?
OE seals are fine, even genuine ones crack eventually but my two Britpart replacements fitted fine, don't leak (no sealant used) and don't show any signs of cracking yet. One has been on for 7-years and the other was fitted to my other frame last year (both with heated screens).
 
You must log in or register to reply here.

Similar threads

archwayanimal
Disco 2 Bottom windscreen finisher seal gap?
Replies
0
Views
454
archwayanimal
archwayanimal
A
Soft Top Fitting Question
Replies
16
Views
971
ANK84
A
ryan_1993
300 tdi Defender 90 Rear Diff Pinion Seal Replaced now leaking horrifically
Replies
7
Views
2K
ryan_1993
ryan_1993
S
glazing seal for windscreen
Replies
10
Views
2K
sprie
S
G
D1 door seals
Replies
4
Views
720
guzzi lemans
G
Back
Top