Window winder handle removal Help Needed.

Hi All,
Please can someone help me out ... I'm trying to remove the rear window winder handle so that I can get the rear door card off to fix a problem where the rear door won't open from either the inside or the outside. (the child lock is OFF).
I'm assuming that it will be the linkage inside has either broken or come loose/apart, but I need to get access to it to find out and repair it.

Many Thanks,
Aaron. :tea:

Hi Aaron,

The handles are held on by a spring clip.
If you carefully push the circular trim on the door card in towards the door to make a gap,
You should be able to see the clip, which fits round the shaft of the winder.
This will slide off, I used a thin flat blade screwdriver.
If you point the winder knob to the floor, the spring clip will slide off upward toward the ceiling.
Just pop the screwdriver blade behind the spring clip and prise it up.

Hope this helps.
Chris