Cossie David
New Member
- Posts
- 246
I have just fitted a new window regulater to my drivers door as i was getting "window not set " message , so what goes wrong with the regulater as my old one looked as good as the new one i have fitted
Window regulater
- Thread starter Cossie David
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
The teeth wear and jump. Does your new one work ok??????????
Cossie David
New Member
- Posts
- 246
Yes it works fine now, all i have to do now is replace the front passenger door latch as thats now failed, wont lock or unlock with the remote, i did remove it and took it to bits , cleaned it and put it back on the vehicle but only worked a couple of times .
So this week so far i had the window regulater fail, door latch, brake light switch,and a bulb for the heater display fail, but it has been trouble free for over a year so cant complaine
So this week so far i had the window regulater fail, door latch, brake light switch,and a bulb for the heater display fail, but it has been trouble free for over a year so cant complaine
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Does that not prove that the old one was nackered??-its one of the most common faults on the P38 as it gets most wear and comes under a lot of pressure when the Window Not Set reset procedure is carried out.:behindsofa:
Cossie David
New Member
- Posts
- 246
It sure does but mine was not jumping teeth, anyway its fixed now just got to wait for the next problem
