Will the 3 Amigos go out on their own?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

inframike

New Member
Posts
14
Location
Norwich
Hi,

Currently got the Disco 2 jacked up and in the process of getting to the sensor to check it/clean it re-seat it etc.

Question is thread title: Will the lights go off on their own if I sort it or, do i have to pay another 26 quid to get another diagnostic to clear the problem and maybe find out problem isnt sorted and i need a new sensor?

Thanks

Mike
 
Hi,

Currently got the Disco 2 jacked up and in the process of getting to the sensor to check it/clean it re-seat it etc.

Question is thread title: Will the lights go off on their own if I sort it or, do i have to pay another 26 quid to get another diagnostic to clear the problem and maybe find out problem isnt sorted and i need a new sensor?

Thanks

Mike

Mike,

If it was a wheel sensor issue which im assuming it is...I'm pretty sure the lights will stay illuminated untill you will have had the fault deleted off :(

But you never know!!!!
 
bummer!

so, i've actually got no way of knowing whether ive fixed it, or i need to get a new sensor.....

got my MOT on tuesday so i need to get it sorted!
 
Last edited:
bummer!

so, i've actually got no way of knowing whether ive fixed it, or i need to get a new sensor.....

got my MOT on tuesday so i need to get it sorted!

Did you try it after cleaning up sensor? Do the amigos go out?

Options open to you.... get it cleared.....take a gamble you've fixed the problem and take for drive and see if Amigos come back.... and if that fails THEN you have cost of new sensor + 2X Testbook fee

Or

Buy a new wheel sensor NOW.....fit it and get the fault code cleared and that should be problem solved...

ORRRR as a real last resort if short on time etc etc....think about disconnecting the ABS dash light for the MOT.... then re-connect after and sort the sensor? (I wouldnt recommend this though...and I dont know how it's done either!)
 
I will start by saying I don't know much about D2's but RRC and D1's ABS system can give a blink code. If you can find out if you can get a blink code off the ABS ECU you should also be able to clear it. It may be clutching at straws but worth a go I would have thought.
 
The first diagnostic showed a fault with the o/s wheel sensor. Ive checked the bearings as best i can and they appear fine so it must be the sensor.

I've removed cleaned and replaced, but not tested with multimeter.

May just buy a new one and go from there.... will save me overall. Keep the other one as a spare if it tests ok...
 
HI all, just to let you know i took my Disco2 to my local garage who does my MOT's and they deleted the codes free of charge.

2/3 amigos went out, the third (ABS) went out after drving for a minute...

They havent come back on..Sweet!

So, just to confirm what i did.

Removed wheel and break caliper
Removed break disc (make sure you buy replacement disc retaining screws before starting. mine strippied and i drilled it out.)
Removed sensor.
cleaned sensor
cleaned sensor seat (the area onto which the sensor sits)
greases and replaced and tightened

thats all. I would have tested the sensor but i didnt have a multimeter.

thanks for help and advice from all threads, new and historical.

I'm about to re-seal both sunroofs.... wish me luck!
 
Back
Top