Will a disco steering wheel fit my series 3 ?

Will a disco steering wheel fit my series 3 ? as i dont like the one thats on and want somthing alot chunkyer or know any others what fit thanks

no

disco will not fit you will find some on fleabay if not paddocks sell them

thanks what about an old rover one im shure iv seen one with one on.

mg metro will

yella said:

mg metro will

Click to expand...

now that would look ****

Keep the original one mate, it suits the car and does the job fine, there's a reason it's so big, to get the leverage!

mickdj said:

thanks what about an old rover one im shure iv seen one with one on.

Click to expand...

you have a pm

yeh, keep origional, we got a small mountey style one, looked great, couldnt turn the fecker, well unless you've bodged power steering in

Adz rekons grippa's steering wheel on his series is "the size of a shirt button" and I don't think he has any probs..

I got a Mountney Leather one in 15" size, so 2" smaller than original. Any smaller and you got to go to the gym

I have a Triumph Dolimte wheel in the 2a 88" it's fine, you should always try to be moving to steer anyway even if it's just inching forward or backward or you'll end up with very sloppy steering box and there only so much ajustment before you get loads of free play. You'll have fun taking the original wheel off too, can you film it so i can have a laugh?

Dezzy said:

You'll have fun taking the original wheel off too, can you film it so i can have a laugh?

Click to expand...

i had one come off in my hands before, luckily i was just sitting on me drive!

My lightweight came with a tiny wheel, it looked **** and was a bastard to turn. Dont buy an early 90 wheel, they dont fit either so if anybody wants one....

I have a 10 inch (Snigger) Astrali wheel.. Bearing in mind Most Classic minis had 12 inch wheels!..

Gives **** loads of room inside the cab and it doesnt effect steering too much.. Think of it this way you dont want to be steering when stood still becuase that nackerers your steering box and linkages and tyres..

I have found those aftermarket mourtney wheels just flex in your hands!.. My mates on his 2a with 205s on literally just flexes back and forth!

Why not try a 10-12 inch astrali wheel with HGV knob?.. You know the kind that bolts to your wheel so you can steer one handed? Thats what im going for when I have passed my test.. Trying to keep out of bad habits you see

Oh but I'll mention Im built enough to use a 10 inch wheel with 7.50s and 235,85s!

10" steering wheel....nah, not if you are doing hundreds of miles a day!

Anyone else had the prob with Mountney ones flexing?

rustyrhinos said:

10" steering wheel....nah, not if you are doing hundreds of miles a day!

Anyone else had the prob with Mountney ones flexing?

Click to expand...

Me old III had a 12 & it wuz ok on & offroad. Me current wun's got a 13" & is fine doing 'undreds of miles a day.

Dunno abart flexing, but I did hit it in anger wunce & bent it to fark! Bent back easy enuff & it's good to know if it ever hits me it'll bend without doing too much damage.

Grippa said:

Me old III had a 12 & it wuz ok on & offroad. Me current wun's got a 13" & is fine doing 'undreds of miles a day.

Dunno abart flexing, but I did hit it in anger wunce & bent it to fark! Bent back easy enuff & it's good to know if it ever hits me it'll bend without doing too much damage.

Click to expand...

The Dibnah had a 13" steering wheel (Ok Grippa - i know it was red) and that was ok with 7:60's.

I think its the steering column yu need to be more worried about!

The Mad Hat Man said:

I think its the steering column yu need to be more worried about!

Click to expand...

Yeah, that would give you a fair poke in the chest!