Disco 1 Will a disco 2 tailgate fit a disco 1 ?
- Thread starter DiscoLyle
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,620
The metal and glass part of the door is identical to the D1, so just change the parts that are applicable to the D1, door card, locking bits and external handle.
Thank you
What about the hinges. Im sure I've read somewhere that disco 2's have either 2 upper or lower discovery 1 hinges ?
What about the hinges. Im sure I've read somewhere that disco 2's have either 2 upper or lower discovery 1 hinges ?
ronsealdeath
Sagging Member
- Posts
- 1,851
- Location
- Swansea, Wales
Nope been there got the t shirt. We found out after a lot of swearing that they are different. In the end we put the old tailgate back on the tdi and swapped the glass from the td5 tailgate in to it. The glass is interchangeable, nothing else is. Then i chucked the td5 tailgate in the scrap.
discool
Well-Known Member
- Posts
- 13,620
Haven't a clue for the D2
but the D1 tail gate hinges have part numbers for the upper and lower hinge which suggest that they are different from each other.