Wide Angle prop, 200 prop, LT230 bits :)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Urm it's not EASY to tell usually but the wide angle tends to have a much longer slip joint.

This one is 110mm slip whereas the stock props are around 40mm

Pop one end off and give it a slide.

Also it's fairly easy to tell by wobbling the UJs which ones are wide angle but you kinda need one of each side by side.

Some pics of your prop would help as there are a few distinguishing features normally.


the yolks are also wider normaly to account for a larger UJ so a stock uj is 75mm so prop is around 10mm largert than that
the uj on my front prop is 82mm and over all its closer to 90-95mm

(but please correct me if im wrong)
 
Last edited:
Back
Top