Which ones ?

Ok guys which poly bushes. There are 3 in the link.

Land Rover Discovery 2 Polyurethane Bush Kits

Thanks

NIRover said:

Ok guys which poly bushes. There are 3 in the link.

Land Rover Discovery 2 Polyurethane Bush Kits

Thanks

Click to expand...

i ve fitted **** loads of bp kits ,cheap and complete vehicle ,i did once get a kit which bushes cracked once bolts tightened but they replaced it ,but others have gone many years ,there may be better kits available but the bottom 2 are cotton reel type bushes not 2 halves ,bloody **** to fit

Floflex come in two halves

I've got a flo flex it on a disco 1 wish I'd just got all new standard 1s u can't realy feel any difference .polybushes are very stiff and can eventually over time wear the metal out instead of the rubber

NIRover said:

Ok guys which poly bushes. There are 3 in the link.

Land Rover Discovery 2 Polyurethane Bush Kits

Thanks

Click to expand...

hi,you asked this question on another thread.use standard rubber bushes.they are better than poly ones.

Superpro, every time. They're the only bush that offers an improvement in ride over standard.

Hi Gemsdad. I asked if poly bushes were the way to go in one post and in this one there is a link which takes you to a site with 3 kits. Maybe someone has used these before and could have advised me.
As usual if I buy the cheap ones they may not last

NIRover said:

Hi Gemsdad. I asked if poly bushes were the way to go in one post and in this one there is a link which takes you to a site with 3 kits. Maybe someone has used these before and could have advised me.
As usual if I buy the cheap ones they may not last

Click to expand...

ok,but you have been advised as to which ones most have used.tis your call now.me i would always use the correct gen parts.

Guys thanks for all the nice replies and I will ge sorted