which are the best shocks for a Disco 2 at the moment?

sierrafery said:

IMO it's a shame that they offer any shocks at the quality they make them ... i had to remove my TF shocks just a bit after they went out of warranty cos they were rusted away and softened as sh*t... so it is the steering damper from them... i'd not touch TF again, that's my choice

Click to expand...

My problem is that I would like to get a 2in lift and retain SLS. Bilstein doesn't offer a shock that would work with this setup. The TF Pro Sport +2" seems to be my best option at the moment.

Cellular dynamics are crap..

Last set i fitted to a Disco 1 and they lasted 4 months..

Bilstein as said above

Michalis Karatzis said:

My problem is that I would like to get a 2in lift and retain SLS. Bilstein doesn't offer a shock that would work with this setup. The TF Pro Sport +2" seems to be my best option at the moment.

Click to expand...

IMO your best option(if it's about quality) would be the expensive one: https://www.lro.com/land-rover-part...absorber-kit-plus-2-inch-discovery-2-set-of-4

sierrafery said:

IMO your best option(if it's about quality) would be the expensive one: https://www.lro.com/land-rover-part...absorber-kit-plus-2-inch-discovery-2-set-of-4

Click to expand...

Not so sure these will work with SLS at the back and +2". Do you know their open/close lenght?

I dont know theyr's lenght but i can't see the relevance of SLS when it comes to dampers cos any damper should handle the ORM... as the standard Bilstein does very well... as you can see the TF +2 fits ALL D2 modells with 2 inch lift regardless of coils or air https://www.island-4x4.co.uk/terrafirma-shock-absorber-sport-disco-50mm-tf147-p-5183.html

a friend of mine who has 2" lift and SLS + ACE fitted those Fox shocks after he had to bin TFs in less than 4 years and he said that the difference is huge, twice like in the price

It has to do with the fact that most +2in lifts are done using a stiffer spring with the same length as the standard that ends up keeping the car 2in higher. For this application a shock with the standard lengths is ok (eg bilstein, ome, tf119).
If you raise the rear using 2in spacers and SLS then the standard length shock will top-out very easily, hence you need +2in shocks (the best I could find are TF147). At the front you can use TF118 or TF146 without issue, both will work ok.

I hope this makes sense.