blackvulcan100
Active Member
- Posts
- 188
- Location
- In the Cotswolds
Sorry to be a bit thick but people talk about checking the ECU for oil contamination.Simple question I lift the bonnet and where is the ECU ? What do I look for ? Cheers
Where is the ECU ??
- Thread starter blackvulcan100
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
stchris356
New Member
- Posts
- 684
- Location
- Warwick,UK
I presume your talking about a TD5!
With the bonnet open, take the battery cover off on the driver side, under that cover you will see the battery,vehicle jack and behind that slotted in is the ECU, if memory serves theres a screw holding it in, if so remove the screw and slide the ECU out and remove the two large multi plugs and inspect for oil.
If oil is found, clean out with contact cleaner spray as a temporary measure and replace the injector loom, I would advise getting a genuine one and theres plenty of "how to's" around explaining how to replace it.
Hope that helps.
Chris
With the bonnet open, take the battery cover off on the driver side, under that cover you will see the battery,vehicle jack and behind that slotted in is the ECU, if memory serves theres a screw holding it in, if so remove the screw and slide the ECU out and remove the two large multi plugs and inspect for oil.
If oil is found, clean out with contact cleaner spray as a temporary measure and replace the injector loom, I would advise getting a genuine one and theres plenty of "how to's" around explaining how to replace it.
Hope that helps.
Chris
blackvulcan100
Active Member
- Posts
- 188
- Location
- In the Cotswolds
Thanks Chris I will be doing that today. Malc
Similar threads
