bankz5152
Well-Known Member
- Posts
- 9,186
- Location
- South London/North Kent
2 years later still puts a smile on my face! Especially when its all muddy driving home and I basically get my own 50ft exclusion zone!
When does the novelty wear off?
- Thread starter rhillahorse
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
when i can get mine out of the garage again after being stuck in there for weeks ( scaffolding round the house ) the novelty should start all over again, i am off for two weeks right now and can't use it 
bluedog333
Well-Known Member
- Posts
- 5,369
- Location
- Henley on Thames, Oxfordshire
Leighhalley
Member
- Posts
- 19
- Location
- Grampian area
For my misses it wore off the first time we broke down in one of the hardest downpours i had seen in years, it wore off for my mum rescueing the misses in said downpour.
Me on the other hand, still over the moon with it after 9 months, 2 breakdowns, nearly getting buggered by a deer in the woods on the second one, and countless new parts... But then again my money wasnt doing anything sat in that bank account any how!
Me on the other hand, still over the moon with it after 9 months, 2 breakdowns, nearly getting buggered by a deer in the woods on the second one, and countless new parts... But then again my money wasnt doing anything sat in that bank account any how!
- Posts
- 1,824
- Location
- In the middle, somewhat elevated
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Leighhalley
Member
- Posts
- 19
- Location
- Grampian area
- Posts
- 1,824
- Location
- In the middle, somewhat elevated
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Some landies do!
Always one of the first things I do when I buy one. Seriously, though, deer are a problem round there. We have had a few near misses!
Leighhalley
Member
- Posts
- 19
- Location
- Grampian area
I love in a built up area toward the edge of town and nearly hit a young un on the way to work at 4am last week whilst still in my street!
rhillahorse
New Member
- Posts
- 24
- Location
- Staffordshire
Just paid £200 to fix water leak and replace fan belt, and I'm still smiling
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Nice eating if you do get one!
Just paid £200 to fix water leak and replace fan belt, and I'm still smiling
Been driving them since early eighties, and still smiling!
Had one almost continuously since around 1969.
I even commuted to just outside Glasgow from Halifax for 3 years and she never missed a beat ... and that was in my Series I
Currently I have a 1999 110 2.5 NAD and she has never let me down, and only went to a stealer once as I didn't have time to change the clutch, and that cost me over £800! Never again!
There aren't many bits on her that I don't know and love, and if all goes well she will be getting a new chassis later on this year!
I even commuted to just outside Glasgow from Halifax for 3 years and she never missed a beat ... and that was in my Series I
Currently I have a 1999 110 2.5 NAD and she has never let me down, and only went to a stealer once as I didn't have time to change the clutch, and that cost me over £800! Never again!
There aren't many bits on her that I don't know and love, and if all goes well she will be getting a new chassis later on this year!
I have always wondered why they were not standard, enough people had them fitted after market.
Moominmama
Member
- Posts
- 16
Been a 90 owner for about 8 weeks, 2 of those, have been anxiously awaiting her return from recon engine fitting. Went to Dingocroft's 30th birthday bash yesterday, so many Landies all in one place, it was beautiful! Trust me, your love will never die! I need to stop waving like a loon at Landies when I'm in my Astra!
bluedog333
Well-Known Member
- Posts
- 5,369
- Location
- Henley on Thames, Oxfordshire
twelsh37
Active Member
- Posts
- 122
- Location
- Colchester
I've had my 110 200 tdi CSW for just over a vear now. In that time I have done the following.
1. Fitted secondhand winch bumper and won 9.5xp winch £400.00
2. New terrafirma steering guard about £100.00
3. 5 new BF Goodrich AT2 tyres £615.00
4. New front disks and pads, rear calipers, drums and drum brakes. About £100.00
5. Snorkel. About 110.00
6. Steel Snow cowl - £130.00
7. New front prop, alternator and fitted by a local land shop £415.00
8. Raptor engineering dash console £85.00
9. Midland CB £45.00
10. Jacking rock sliders £130.00
So that's about £2100.00 spent on a landie that cost me £3800.00
I have purchased a second hand bulk head for £150.00 and it's cost me £200.00 to veg it shot-blasted, metallised and resprayed in black. I'll pick that up next weekend.
Today I can hear/feel a bearing going. I think it's the front transfer bearing. Just ordered the parts and some other stuff so that's another £50 quid.
Then of course there at all the other bits you buy.
Tools £500
Recovery straps, strops, shackles £100.00
Dog guard £90.00
Rust treatments £20.00
Hammarite £40.00
Nuts and bolts assorted £20.00
And the miryad off stuff I've forgotten could easily put me into the £2500.00 bracket.
I still love the beast though. I smile like a loony driving it. My wife doesn't appreciate it as much. Perhaps because she's petite (short) and I've removed the CSW foot steps. And it's noisey like a b'strd due to having no carpets up front.
Oh and my other money out is my horse. I'm cursed I tell you, I'm bloody well cursed
Tom
1. Fitted secondhand winch bumper and won 9.5xp winch £400.00
2. New terrafirma steering guard about £100.00
3. 5 new BF Goodrich AT2 tyres £615.00
4. New front disks and pads, rear calipers, drums and drum brakes. About £100.00
5. Snorkel. About 110.00
6. Steel Snow cowl - £130.00
7. New front prop, alternator and fitted by a local land shop £415.00
8. Raptor engineering dash console £85.00
9. Midland CB £45.00
10. Jacking rock sliders £130.00
So that's about £2100.00 spent on a landie that cost me £3800.00
I have purchased a second hand bulk head for £150.00 and it's cost me £200.00 to veg it shot-blasted, metallised and resprayed in black. I'll pick that up next weekend.
Today I can hear/feel a bearing going. I think it's the front transfer bearing. Just ordered the parts and some other stuff so that's another £50 quid.
Then of course there at all the other bits you buy.
Tools £500
Recovery straps, strops, shackles £100.00
Dog guard £90.00
Rust treatments £20.00
Hammarite £40.00
Nuts and bolts assorted £20.00
And the miryad off stuff I've forgotten could easily put me into the £2500.00 bracket.
I still love the beast though. I smile like a loony driving it. My wife doesn't appreciate it as much. Perhaps because she's petite (short) and I've removed the CSW foot steps. And it's noisey like a b'strd due to having no carpets up front.
Oh and my other money out is my horse. I'm cursed I tell you, I'm bloody well cursed
Tom
Similar threads
