gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
can anyone tell me if wheels from range rover p38 will fit the defender, a work mate wants to put the hurricane wheels on his defender,
cheers
cheers
wheels
- Thread starter gavbriggs
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 14,902
- Location
- Doncaster
No, it would need adaptors .. google is your friend.
It also depends which P38 wheels 'cos some (I believe) had slightly different hole diameters, so a definitive answer can't (I think) be given without some further investigation!
It also depends which P38 wheels 'cos some (I believe) had slightly different hole diameters, so a definitive answer can't (I think) be given without some further investigation!
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
its my old hurricane wheels he wants, i have the nuts with it too as the others i fitted came with nuts, you are correct in saying the wheels have different diameters tho. i will tell him about the spacers!
- Posts
- 2,884
It depends on the year of the defender i think. I'm pretty sure they will fit on a TD5 Defender and Discovery. Somebody should be able to comfirm it or shoot me out of the water..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
P38 wheels will fit D2's so if D2 wheels will fit td5 deependers then by the powers of deduction I have deduced that so will P38 wheels.. 
If not then they won't.
If not then they won't.
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
Hang on a minute. You have the wheels and your mate has the vehicle you want to know if they'll fit? And you're asking us? FFS
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
Hang on a minute. You have the wheels and your mate has the vehicle you want to know if they'll fit? And you're asking us? FFS
yeah cos i thought you lot knew yer stuff!!! ffs!!!
i'm gonna take him one so he can see what the situation is but i said i'd ask just to clear any issues up that he may have, mainly them not fitting at all!!!
Even if the stud pitch were the same, Landrover have used various different spigot diameters (the hole in the middle of the wheel) that centres the wheel on the hub. As has been said already, you would probably need a fitting kit or a set of spigot rings.
Similar threads
