Disco 2 Wheels to fit 64mm Arches

My mate has bought some arches for his D2 that are 64mm wide from the car body. Standard arches are 45mm. He now wants to get some steel wheels that will fill the arch, but is not sure what offset is required to do this.
Does anyone know what size wheels will fill the arch, so just the tread is covered and the sidewall protruding slightly.?
Thanks in advance.

Eh wtf???

Same question, different wording, what size wheels are in the photo that give a wider stance. Are they 16 X 8 with a +25 offset, or are spacers required for the offset?

You want some like Gregs

https://www.landyzone.co.uk/land-rover/gregs-v8-dii-build.299783/#post-3747708

Marmaduke said:

You want some like Gregs

Click to expand...

That is a very good looking D2 that Gregs has.
Anyway, got it all worked out. It's the +25 offset.
Thanks.

KNine said:

Same question, different wording, what size wheels are in the photo that give a wider stance. Are they 16 X 8 with a +25 offset, or are spacers required for the offset?

Click to expand...

Don't you think it's a rather dumb question though?

And I don't really know what you mean by fill the arches? It's a 4x4. If you want to use it off road, then you'll need room for the wheels to move up and down.

And tbh you really should read up and have a basic understanding of wheel sizes. The rim alone won't give you the answer. But the size and type of tyre too. A wider rim with the same offset will also move the outter edge of the tyre out. But might not acheive what you want.

Marmaduke said:

You want some like Gregs

https://www.landyzone.co.uk/land-rover/gregs-v8-dii-build.299783/#post-3747708

Click to expand...

That looks ok. But probably steers like a tank and likely not very handy off road. And will have the turning circle of a battle ship. Also it looks like the rims stick out the arches, which is illegal and just gives 4x4's a bad rap. And will throw mud all up the sides of the vehicle.

300bhp/ton said:

Don't you think it's a rather dumb question though?

Click to expand...

No, just badly worded,
+25 offset on a 8 X 16 will achieve the desired look he is wants to achieve.

I'm no against running spacers. But I do think they should try and understand what they are really wanting, why and the impact mods will have on the vehicle.