Glyn D
Active Member
- Posts
- 134
- Location
- North wales
Having a hard time removing a snapped stud for the speedo cable. Looking at this picture, what's the process for removing and refitting this part of the transfer box (highlighted in red)?
What's the process for removing this part of the transfer box?
- Thread starter Glyn D
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Glyn D
Active Member
- Posts
- 134
- Location
- North wales
I think I'm just going to drill and tap a new thread so no rush for an answer to this but might be useful for future reference
raywin
Well-Known Member
- Posts
- 3,808
- Location
- North Yorkshire
Don't know if you might find something here https://www.landyzone.co.uk/land-rover/another-lt-230-rebuild-which-kit.298762/
I had some kind assistance when i did mine.
I had some kind assistance when i did mine.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
drain the oil undo the 6 bolts prise off(top right hand corner as you look in pic)clean mating surfaces thoroughly petrol or brake clean etc and reseal with silicone sealant or other setting sealant
Glyn D
Active Member
- Posts
- 134
- Location
- North wales
Thanks guys.
Drilling a new hole worked in the end.
Drilling a new hole worked in the end.
