Wondering what my discovery td5 is worth spares or repair, it's a 2002 facelift model , think the head gasket has blown, just got mot,d in February, it's the top of the range model , 7 seater , full leather , 18" alloys , quality sound system , gold, auto - just lost all heart in it now !
What's it worth ? Discovery td5 2002 spares or repair
- Thread starter vizlauk
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Take a look on ebay as all you'll get on here are offers of confectionery
martin1512
Well-Known Member
- Posts
- 3,941
- Location
- Half way up a cliff in Dorset
I'll open the bidding at a packet of Jammie Dodgers.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,137
- Location
- Gloucestercotshirewolds
I'll open the bidding at a packet of Jammie Dodgers.
A WHOLE packet?
Dammit that's me out already :Cry:
martin1512
Well-Known Member
- Posts
- 3,941
- Location
- Half way up a cliff in Dorset
Well almost a full packet, my 3 year old has licked the jam out of the middle of one of them.
- Posts
- 66,499
- Location
- The Wooly Witch
Where are you?... so we can determine whether to come see ...
Also depends on mileage, condition, chassis etc etc.
In a decent condition in good running order with reasonable miles (120k) gold nit the most popular colour I would put a ball park figure of £3500-£4k.
If head gaskets gone your looking at £1000ish. So £2k ish?
In a decent condition in good running order with reasonable miles (120k) gold nit the most popular colour I would put a ball park figure of £3500-£4k.
If head gaskets gone your looking at £1000ish. So £2k ish?
That's around the figure I had in mind, the chassis is mint, as is the bodywork !
cambridgecockney
Active Member
- Posts
- 714
Get your spanners out and fix.
The V8 man
Well-Known Member
- Posts
- 1,951
- Location
- Redhill Surrey
Might be interested in that, any pics ?
I will take some today and upload them !
Well the disco went into the garage, head pulled and no signs of cracks or anything ! Still had the plastic dowels in so I don't think the head has ever been off ! Got a good deal on a new head, so put my head in to the engineers to get pressure tested ! All was well so I got it skimmed as well , (so I have a spare mint head that will be getting sold soon), bought a complete head gasket kit, new metelwork dowels, new fuel pressure gasket and oring set, new head bolts etc, there was signs of wear on the camshaft so a replacement was bought, should be getting it back from the garage over the weekend ! With the bill.
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
+1 :d
