CameronW1996
Active Member
- Posts
- 109
What paint should i use to paint my chassis ?
What paint to i use to paint my chassis ?
- Thread starter CameronW1996
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dan_Trials
Well-Known Member
- Posts
- 2,546
Not being funny here but I use chassis paint :lol:
A lot of it is to do with prep though and there are many products to choose from and each have their own preference. This has been discussed many times so use the search function, grab a nice cuppa and do some reading up
A lot of it is to do with prep though and there are many products to choose from and each have their own preference. This has been discussed many times so use the search function, grab a nice cuppa and do some reading up
Southernlandy
Active Member
- Posts
- 523
- Location
- Hampshire
Quote from my rebuild thread:
From toolstation:
Toolstation > Painting & Decorating > Metal Paints & Primers
The Flag rust converter- Needed about 3 small tins to complete chassis, axles and brackets.
Then top coated with one coat of the Flag hammer finish paint. (Very difficult to clean brushes even with white spirit so I tried to do as much as possible in one and then throw the brush away)
Hopefully that will give the chassis a few more years of life before I go for a galvanised chassis.
From toolstation:
Toolstation > Painting & Decorating > Metal Paints & Primers
The Flag rust converter- Needed about 3 small tins to complete chassis, axles and brackets.
Then top coated with one coat of the Flag hammer finish paint. (Very difficult to clean brushes even with white spirit so I tried to do as much as possible in one and then throw the brush away)
Hopefully that will give the chassis a few more years of life before I go for a galvanised chassis.
