What is this?

navara22

New Member

Posts

39

Location

Brighouse

• Dec 18, 2012

• #1

Hi, I am new to this landy lark, so please accept my apologies for any stupid questions.
I am trying to replace my n/s front outrigger, I have removed the floor and come across this thing .....
The pipes off it wind their way round the engine and end up on the cylinder head
I can't find anything in the Haynes manual.
Thanks in advance

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Dec 18, 2012

• #2

you wont as its not a std kit i can see 1 pipe goes to head were does other go ?

 

navara22

New Member

Posts

39

Location

Brighouse

• Dec 18, 2012

• #3

Down to the top of the oil filter. I have managed to find a name, it's a kleenoil which appears to be an aftermarket oil filter. God knows why it's there, safe to say the pipes are right in the way

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Dec 18, 2012

• #4

id remove it and plug holes tdis last forever (nearly) with regular oil changes ,i could see it has screw on to pipe hyd fittings which is unusal in a bought product

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Dec 18, 2012

• #5

navara22 said:

Down to the top of the oil filter. I have managed to find a name, it's a kleenoil which appears to be an aftermarket oil filter. God knows why it's there, safe to say the pipes are right in the way

Click to expand...

just read up on those ,cyclonic oil filter used to extend oil changes ,still id remove it and change oil regulary

 

navara22

New Member

Posts

39

Location

Brighouse

• Dec 18, 2012

• #6

If I do remove it, what do I do with the holes where the pipes went? Can I just bypass it and take the pipe from the head straight to the oil filter?
Thanks by the way