pffttt ... is that all ... i bin called worse than that , and recent too...a cnut..and an ol cnut at that
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
spudy
Well-Known Member
- Posts
- 1,220
snigger
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
bout 4 or 5 months ago I was in Leeds in me mates Disco. when the rear brake pads went down to the metal. Me & Spudy had to change em, so I could get home. Told mates bloke it needed noo disk, cos the ones that were in it were fooked. Couple of weeks ago I heard em rubbing Told me mate's bloke they needed sorting. Today there was brake fluid ****ing out the O/S rear calliper. Just took the wheel orf and one of the Pads has staged a breakout one of the splitpins is bent ta buggery and theres no sign of the pad at all The piston has belted the disc and popped the seal.
So noo disks (5 months too late) noo pads, noo piston, and noo pins,clips and a sealkit on order
one of the splitpins is bent ta buggery and theres no sign of the pad at all The piston has belted the disc and popped the seal.So noo disks (5 months too late) noo pads, noo piston, and noo pins,clips and a sealkit on order
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
dont use sand as it releases the silicates contained in it which is real bad for you, get your self some proper blasting grit and good mask, ideally an air fed oneDid ye just buy the the gun and hose kit that ye stick on a compressor and a bag of sand? Just curious as kinda lookin' intae this mesel'
yella
New Member
- Posts
- 15,991
ffs saggy james, yerv got me worried now, im allus sand blasting and i just go and nick a bucket full off the beach when i need it
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
yeah sand was outlawed a few years ago for blasting purposesffs saggy james, yerv got me worried now, im allus sand blasting and i just go and nick a bucket full off the beach when i need it
yella
New Member
- Posts
- 15,991
now yer fookin tell me
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
yella
New Member
- Posts
- 15,991
Ah know that baggy cos ah looked at proper stuff... cheers anyways
yer fookin smart arse,
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
As per title...
Ah've rubbed down 1 and an arf wheels tonight... feckin' borin' job!!!
Ah've rubbed down 1 and an arf wheels tonight... feckin' borin' job!!!
yella
New Member
- Posts
- 15,991
i sand blasted 4 in an hour "cough" "cough"
Bluestrobe
IF ALL ELSE FAILS SHOOT THEM!
- Posts
- 316
Binned the pipe from the EGR and fitted a one piece intercooler pipe then started fitting my Safari Snorkel, flattened two drill batteries and killed off my Black & Decker drill as well, discovered some rust behind the wing whilst drilling holes and waxoyled the fecker while I was at it
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Have got a flapper wheel and a wire brush both of em fit me 5" grindererer. bit quicker than sanding down.
landy10
New Member
- Posts
- 1,872
you had some beer though right?
