What have you done to your Landie today.

timtheenchanteruk · Sep 19, 2014

Reattached my CB aerial, its now drilled into the wing seeing as wales broke my mount...

Oh, and fitted new steering damper, I can now drive more than 45-50mph.

landowner · Sep 19, 2014

timtheenchanteruk said:
Reattached my CB aerial, its now drilled into the wing seeing as wales broke my mount...

Oh, and fitted new steering damper, I can now drive more than 45-50mph.

Might be a problem somewhere if you need steering damper on the road, mine dives without one and is fine even at motorway speeds, could be wear in swivel pins or summat

RichP · Sep 19, 2014

Fitted new in fuel/sender unit. Seems to run a bit better now without all the air being sucked in through the rusted pipes.

mikescuba · Sep 20, 2014

timtheenchanteruk said:
Reattached my CB aerial, its now drilled into the wing seeing as wales broke my mount...

Oh, and fitted new steering damper, I can now drive more than 45-50mph.

I presume you had to earth it to the chassis or something ? What thickness cable did you use. I have mine mounted on the roof rack and earthed to the chassis but I'm not too happy with it.

mikescuba · Sep 20, 2014

I collected 12 breeze blocks from the builders merchant. Think I might leave them in the Landy as it seems to run much quieter and smoother. No rattles or squeaks etc.

v8geoff · Sep 20, 2014

Finally sprayed front bumper and a bar were a galvanized but now gloss black

a2dds · Sep 20, 2014

Drove it work and the exhaust & intake gasket split. Sounds like a steam train. Ordered one of those up pronto.

Also been ordering all its bits for a service. Overdue

Skudman · Sep 21, 2014

Just fitted my new 265 75 16s

v8geoff · Sep 21, 2014

Washed and polished rangie

td5nut · Sep 21, 2014

jet washed at home,washed and wiped down with a microfiber towel,dont need a wax this time,checked tyre pressures,mot Tuesday and check underseal.

The Mad Hat Man · Sep 21, 2014

removed front suspension a rear shocks ready to replace with new stuff next weekend.

wire brushed, Kurusted and hammerited front lower shock bracket on axle and turret mounts.

Had an axle stand collapse

. that made me crap myself when the front disk hit the concrete about 4 inches from me

:faint2:

danny6801 · Sep 21, 2014

Stripped it down of all its goodies ready for painting and fitted my new puma bonnet.

aaronmorris · Sep 21, 2014

danny6801 said:
Stripped it down of all its goodies ready for painting and fitted my new puma bonnet.

Nice, What colour you painting it bud?

danny6801 · Sep 21, 2014

aaronmorris said:
Nice, What colour you painting it bud?

I'm thinking black top and bonnet and silver body. Where is the best place for paint online and what is the best paint to use. Like the pic but with a black bonnet.

aaronmorris · Sep 21, 2014

danny6801 said:
I'm thinking black top and bonnet and silver body. Where is the best place for paint online and what is the best paint to use. Like the pic but with a black bonnet.

Best paint to use in my opinion is 2k. But with all the health and safety bullsh*t that's your choice.
Doesn't bother me, My thinking is it's not like I do it every day.

Best place to get it. Well I buy all mine online/ebay. Autopaint brighton, Hugs paint and a few others depending what I want.
Or go to the local paint shop, I don't because I can't be arsed dealing with people in shops

Should look good by the way dude

danny6801 · Sep 21, 2014

aaronmorris said:
Best paint to use in my opinion is 2k. But with all the health and safety bullsh*t that's your choice.
Doesn't bother me, My thinking is it's not like I do it every day.

Best place to get it. Well I buy all mine online/ebay. Autopaint brighton, Hugs paint and a few others depending what I want.
Or go to the local paint shop, I don't because I can't be arsed dealing with people in shops

Should look good by the way dude

How much paint did you use on yours for the top and body as I don't want to buy loads of the stuff.

aaronmorris · Sep 21, 2014

danny6801 said:
How much paint did you use on yours for the top and body as I don't want to buy loads of the stuff.

I bought 5L as that's all it came in (Con really) Used about 3L at most.

defender11069 · Sep 22, 2014

changed these because it made it do this.

landowner · Sep 22, 2014

Fitted handbrake and wired reversing light up to gearbox

Animal88 · Sep 22, 2014

put my 7.50x16's on last night to try and use a little less fuel for work. hopefully it's going to work

What have you done to your Landie today.

Well-Known Member

Pensioner Pete

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Head's a shed

Well-Known Member

Attachments

Head's a shed

Well-Known Member

Head's a shed

AKA Mr cool...

Attachments

Pensioner Pete

Attachments

Active Member

Similar threads