What have you done to your Landie today.

blue beasty said:

Worked out the fuel consumption from last night 250 miles motorway blat.

A steady 65 mph all the way returned 19.5 mpg.

Kinda scarey that I'm quite pleased with that Badly need an overdrive

Click to expand...

Don't forget though if yours is a 90 there is always a gallon left in the tank even if you ran it out of fuel so really you are running on 11 gallons instead of 12 gallons which works out at 250 miles = just under 23 mpg

cornish rattler said:

Don't forget though if yours is a 90 there is always a gallon left in the tank even if you ran it out of fuel so really you are running on 11 gallons instead of 12 gallons which works out at 250 miles = just under 23 mpg

Click to expand...

beasty has a series ambulance CR,not a 90.

cornish rattler said:

Don't forget though if yours is a 90 there is always a gallon left in the tank even if you ran it out of fuel so really you are running on 11 gallons instead of 12 gallons which works out at 250 miles = just under 23 mpg

Click to expand...

As GD says a 2 1/4 petrol and measured by topping the tank before and after.....might get 23 with an overdrive

blue beasty said:

As GD says a 2 1/4 petrol and measured by topping the tank before and after.....might get 23 with an overdrive

Click to expand...

Arr sorry thought you had a defender

cornish rattler said:

Arr sorry thought you had a defender

Click to expand...

bods from wyvenshawe,what can ya say.

gemsdad said:

bods from wyvenshawe,what can ya say.:d:d

Click to expand...

:d:d

cornish rattler said:

:d:d

Click to expand...

how goes your tratter G?

Made a new boot space divider

Features - cargo net, removable pin hinges for quick release, spring bolt to hold in position/collapse etc

MOT time for the 90 today. It went straight through with no advisories again, and the tester said the emissions were the lowest he had ever seen on an old diesel!

I've fitted a new window winder mechanism to the driver's side door. the old one was worn and would allow the window glass to be pushed down easily. Not very secure. As I was taking the window winder handle off the spring clip gave a twang, shot past me over the fence into the park, and was never seen again. I drilled a hole and put a self tapping screw in instead. The older design with the handle secured by a screw was much better anyway. I've also finished swapping my hinge screws for stainless ones while the door cards were off.

Refitting headlights and have no idea which wire goes to which connection...

Hi all, MOT due on 9/9/14 so thought id take it see what it fails on lol
It passed no advisories now got 13 months mot :hysterically_laughi

Transformed the metal tube with a brown lump on each end which were spewing metal shards that I found dangling under my 90 back into a rear propshaft

took the tank out my D1 to repair the chassis then took the nearside rear shock mount off to repair the hole under it on the side of the chassis and under it so it's now all cut out and welded and painted ready to be put back together tomorrow

used my disco to go and collect 4 - 8foot long - 4inches x 4 inches fence posts.
middle double seat folded forewards, front passenger seat tilted back, it swallowed the posts easily, (could have got 9 foot posts in)even over the 3 bags of cement on the back floor - made loading the posts easier...
as I drove home, I asked myself, how could I ever part with my old disco.....

after 6 years of ownership, all my family borrow it for fetching or delivering, or towing or getting you there......its an old faithful friend now..

Found a load of old parts from my Disco 2
And the Defender is being put to use by a good friend to move half his garden!!

Just explored what I thought was an oil leak on the road outside. It seems to be excess Dinitrol coming out of the bulkhead thank goodness. Unless the engine or transmission oil has found an new escape route into the box sections, that is.

Put mine up for sale today.

Sadface.

put my D1 back together now the rear section of the chassis is rust proofed just need to clean and paint the rest of it hopefully without finding any more holes. whats the best thing to fill the chassis with to neutralise rust in the chassis. I've heard about old engine oil but don't want something that thin that's going to leak out everywhere but obviously need something thin enough to coat all the inside of the chassis possible

Sold the Ifor Williams Pick Up Canopy on eBay, liquidating assets for future truck customisation!